Managing users
Local users are a set of user attributes configured on the local device. A local user is uniquely identified by username. To enable users using a certain network service to pass the local authentication, you must configure accounts for the users to the local user database on the device.
A local user has the following attributes:
•Username
•User password
•User privilege level
•Service type that the user can use
•Virtual device to which the user belongs
User levels
User levels, from low to high, are visitor, monitor, configure, and management. A user with a higher level has all the operating rights of a lower level.
•
•
•
•
The previously mentioned user levels apply to users using root virtual devices only.
Configuring a local user in the Web interface
Configuration procedure
To configure a local user:
1.Select User > Local User from the navigation tree. Figure 74 Local user
110
