HP 200 Unified Threat Management (UTM) Appliance manual Setting the idle timeout timer at the CLI

Step	Command	Remarks
	• Set a non-recurring scheme:
	clock summer-time zone-name	Optional.
	one-offstart-time start-date	Use either command.
4. Set a daylight saving time	end-time end-date add-time
		By default, daylight saving time is
scheme.	• Set a recurring scheme:
	clock summer-time zone-name	disabled, and the UTC time zone
		applies.
	repeating start-time start-date
	end-time end-date add-time

Setting the idle timeout timer in the Web interface

Perform this task to set the idle timeout period for logged-in users. The system logs out a user that is idle within the specified period.

To set Web idle timeout:

1.Select Device Management > Device Basic > Web Management from the navigation tree to enter the page shown in Figure 71.

2.Enter the idle timeout.

3.Click Apply.

Figure 71 Web management

Setting the idle timeout timer at the CLI

You can set the idle timeout timer for a logged-in user. After a user logs in to the firewall, if the user does not perform any operation when the timer expires, the firewall automatically tears down the connection to the user. If you set this timer to 0, the firewall does not tear down the connection automatically.

To set the idle timeout timer:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A
		user-interface { first-num1
2.	Enter user interface view.	[ last-num1] { aux console	N/A
		vty } first-num2 [ last-num2 ] }
3.	Set the idle timeout timer.	idle-timeout minutes [ seconds ]	10 minutes by default.

94