HP 200 Unified Threat Management (UTM) Appliance Configuring and using command keyword aliases

Configuring and using command keyword aliases

The command keyword alias function allows you to replace the first keyword of a non-undo command or the second keyword of an undo command with your preferred keyword when you execute the command. For example, if you configure show as the alias for the display keyword, you can enter show in place of display to execute a display command.

Usage guidelines

•After you successfully execute a command by using a keyword alias, the system saves the keyword, instead of its alias, to the running configuration.

•If you press Tab after entering part of an alias, the keyword is displayed.

•If a string you entered partially matches a keyword and an alias, the command indicated by the alias is executed. To execute the command indicated by the keyword, enter the complete keyword.

•If you enter a string that partially matches multiple aliases, the system gives you a prompt.

Configuration procedure

To configure a command keyword alias:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A
2.	Enable the command	command-alias enable	By default, the command keyword alias
	keyword alias function.		function is disabled.
			By default, no command keyword alias is
3.	Configure a command	command-alias mapping	configured.
	keyword alias.	cmdkey alias	You must enter the cmdkey and alias

arguments in their complete form.

Configuring and using hotkeys

To facilitate CLI operation, the system defines the hotkeys shown in Table 24 and provides five configurable command hotkeys. Pressing a command hotkey is the same as entering a command.

To configure a command hotkey:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A
			By default:
			• Ctrl+G is assigned the display
			current-configuration command.
		hotkey { CTRL_G CTRL_L	• Ctrl+L is assigned the display ip
2.	Configure hotkeys.	CTRL_O CTRL_T CTRL_U }	routing-table command.
		command	• Ctrl+O is assigned the undo debugging all
			command.

• No command is assigned to Ctrl+T or Ctrl+U.

126