4: Configuring the Web Interface

Occasionally, an Expert Mode menu selection will comprise multiple forms (such as the one shown above). These forms are identified by their tabs. Select the tab to access the desired form.

Button Functions

The control buttons located on the bottom of the ACS Web Configuration window provide you the following functions for operating the interface.

Button Name

Use this button to:

Wizard / Expert

Wizard / Expert Switch the ACS Web Configuration

 

Screen to either Expert or Wizard Mode. The Expert

 

Mode is the default mode; in this mode, the Wizard

 

button is visible and vice versa.

 

 

Help?

Invoke the online help sub window which provides

 

help information relating to the current form.

 

 

Back

Traverse to the previous form (i.e., the form

 

preceding the current form as it appears in the

 

menu).

 

 

Try Changes

Test or run the system based on the settings from the

 

current form without having to save the

 

configuration.

 

 

Cancel Changes

Cancel your changes or reverts back to the original

 

configuration values.

 

 

Apply Changes

Save your changes to the ACS Flash card.

 

 

Next

Traverse to the next form (i.e., the form succeeding

 

the current form as it appears in the menu).

 

 

Saving Your Configuration

The Unsaved Changes indicator on the lower right hand corner of the ACS web configuration window serves to remind you that you have made a configuration entry or change which has not been saved.

32

AlterPath Console Server User Manual

Page 38
Image 38
Cyclades ACS48, 2.3.0 user manual Button Functions, Saving Your Configuration, Button Name Use this button to