Appendix B: Safety Guidelines

DANGER!

Do not push any objects through the openings of the ACS. Doing so can cause fire or electric shock by shorting out interior components.

Important!

Keep your ACS away from heat sources and do not block host’s cooling vents.

Important!

The AlterPath Console Server product (DC version) is only intended to be installed in restricted access areas (Dedicated Equipment Rooms, Equipment Closets or the like) in accordance with Articles 110-18, 110-26 and 110-27 of the National Electrical Code, ANSI/NFPA 701, 1999 Edition.

Use 18 AWG or 0.75 mm2 or above cable to connect the DC configured unit to the Centralized D.C. Power Systems.

Install the required double-pole, single-throw, DC rated UL Listed circuit breaker between the power source and the AlterPath Console Server DC version. Minimum Breaker Rating: 2A. Required conductor size: 18 AWG.

Working inside the AlterPath Console Port Server

Do not attempt to service the AlterPath Console Server yourself, except when following instructions from Cyclades Technical Support personnel. In the latter case, first take the following precautions:

1.Turn the AlterPath Console Server off.

2.Ground yourself by touching an unpainted metal surface on the back of the equipment before touching anything inside it.

AlterPath Console Server User Guide

135

Page 141
Image 141
Cyclades 2.3.0, ACS48 user manual Working inside the AlterPath Console Port Server