| 4: Configuring the Web Interface |
|
|
Field Name | Definition |
Syslog Buffer Size | Maximum size of the buffer. |
By selecting the appropriate radio button, you can configure ACS to:
•Buffer Syslog at all times.
•Buffer only when nobody is connected to the port.
To configure data buffering to send alarm notifications, use the Notifications form (Expert Mode: Administration > Notifications).
3.When done, select the Apply Changes button located at the bottom of the ACS configuration window.
Ports > Physical Ports > Multi-User
The Multi User form enables you to open more than one common and sniff session (multiple sessions) from the same port.
If configured as No (i.e., do not allow multiple sessions), only two users can connect to the same port simultaneously. If configured as Yes, more than two simultaneous users can connect to the same serial port.
A Sniffer menu is presented to the user and they can choose to:
•Open a sniff session
•Open a read and/or write session
•Cancel a connection
•Send a message to other users connected to the same serial port.
If it is configured as RW, only read and/or write sessions will be opened, and the sniffer menu won’t be presented.
If configured as “sniff_session” only, a sniff session will be opened, and the sniffer menu won’t be presented. Default value: no.
AlterPath Console Server User Manual | 105 |
