Figure 83 Understanding command-line parameters

For example, to set the system time to 10:30:20, February 23, 2010, enter the following command line at the CLI and press Enter:

<Sysname> clock datetime 10:30:20 2/23/2010

Using the undo form of a command

Most configuration commands have an undo form for canceling a configuration, restoring the default, or disabling a feature. For example, the info-center enable command enables the information center, and the undo info-center enable command disables the information center.

CLI views

Commands are grouped in different views by function. To use a command, you must enter its view.

CLI views are hierarchically organized, as shown in Figure 84. Each view has a unique prompt, from which you can identify where you are and what you can do. For example, the prompt [Sysname-vlan100]shows that you are in VLAN 100 view and can configure attributes for that VLAN.

You are placed in user view immediately after you are logged in to the CLI. The user view prompt is <Device-name>, where the Device-nameargument, representing the device hostname, defaults to Sysname and can be changed by using the sysname command. In user view, you can perform basic operations including display, debug, file management, FTP, Telnet, clock setting, and reboot.

From user view, you can enter system view to configure global settings, including the daylight saving time, banners, and hotkeys. The system view prompt is [Device-name].

From system view, you can enter different function views. For example, you can enter interface view to configure interface parameters, enter VLAN view to add ports to the specific VLAN, enter user interface view to configure login user attributes, or create a local user and enter local user view to configure attributes for the local user.

To display all commands available in a view, enter a question mark (?) at the view prompt.

122

Page 128
Image 128
HP 200 Unified Threat Management (UTM) Appliance manual Using the undo form of a command, CLI views