HP 200 Unified Threat Management (UTM) Appliance manual Display type of both the device

Step		Command	Remarks
			The default is 1.
6. Specify the number of stop bits.		stopbits { 1 1.5 2 }	Stop bits indicate the end of a
			character. The more the bits, the
			slower the transmission.
			By default, the number of data bits
			in each character is 8.
7.	Specify the number of data bits		The setting depends on the
		databits { 5 6 7 8 }	character coding type. For
	in each character.
			example, you can set it to 7 if
			standard ASCII characters are to
			be sent, and set it to 8 if extended
			ASCII characters are to be sent.
8.	Define a shortcut key for	activation-key character	By default, press Enter to start a
	starting a session.		session.
9.	Define a shortcut key for	escape-key { default character }	By default, press Ctrl+C to
	terminating tasks.		terminate a task.
			By default, the terminal display
			type is ANSI.
			The device supports two types of
			terminal display: ANSI and
			VT100. HP recommends setting the
			display type of both the device and
10. Configure the type of terminal			the client to VT100. If the device
		terminal type { ansi vt100 }	and the client use different display
	display.
			types (for example, HyperTerminal
			or Telnet terminal) or both are set to
			ANSI, when the total number of
			characters of the currently edited
			command line exceeds 80, an
			anomaly such as cursor corruption
			or abnormal display of the terminal
			display might occur on the client.
11.	Configure the user privilege	user privilege level level	By default, the default command
	level for login users.		level is 0 for the AUX user interface.
12. Set the maximum number of			By default, a screen displays 24
			lines at most.
	lines to be displayed on a	screen-length screen-length
			A value of 0 disables pausing
	screen.
			between screens of output.
13.	Set the size of command	history-command max-size value	By default, the buffer saves 10
	history buffer.		history commands at most.
			The default idle-timeout is 10
			minutes. The system automatically
			terminates the user's connection if
14.	Set the idle-timeout timer.	idle-timeout minutes [ seconds ]	there is no information interaction
			between the device and the user in

timeout time.

Setting idle-timeout to 0 disables the timer.

45