![](/images/new-backgrounds/1319271/31927193x1.webp)
Figure 38 Accessing the CLI through the AUX port without authentication
Configuring password authentication for AUX login
Step |
| Command | Remarks | |
1. | Enter system view. | N/A | ||
|
|
|
| |
2. | Enter one or more AUX user | N/A | ||
| interface views. | [ | ||
|
| |||
|
|
|
| |
|
|
| By default, password | |
3. | Enable password |
| authentication is enabled but no | |
password is configured. To access | ||||
| authentication. | the device through the AUX port, | ||
|
| |||
|
|
| you must configure a password for | |
|
|
| authentication. | |
|
|
|
| |
4. | Set a password. | set authentication password | By default, no password is set. | |
{ cipher simple } password | ||||
|
|
| ||
|
|
|
| |
5. | Configure common settings | See "Configuring common settings | Optional. | |
| for AUX login. | for AUX login (optional)." | ||
|
| |||
|
|
|
|
The next time you attempt to log in to CLI through the AUX port, you must provide the configured login password, as shown in Figure 39.
41