FOR THE PLUMBER

CONNECT TO WATER

(observe local codes)

1 Use l/o” OD soft copper tubing for the cold water

SUPPlY.

2P rove‘d e a convenient manual shut-off valve tn the

water lrne

3 Position the tubing so It can enter the access hole

located in the right-hand rear of the cabrnet. The tubing should extend beyond the cabinet front when the cabinet is pushed back into position. See Figure 5.

NOTE:

Always purge the water line before making the final connection to the inlet of the water valve to prevent possible water valve malfunction.

After the cabinet is in place, bend the tubing to meet the connection at the water valve. The garden hose threaded compression fitting is found in the parts bag. This joint provides a convenient disconnect for service. Be sure the tubing is clear of compressor, to prevent rattle.

CONDENSATE PUMP

1.When drain connection below the level of the unit is not available a condensate pump may be used to lift the water to an available drain.

2.Install condensate pump on floor behind ice maker with discharge tube to the rear. Run bin drain directly into pump as shown in Figure 5A.

3.Run power cord thru hole into unit compartment (See Figure 5A)

4.Remove lower grille assembly. (See Figure 5B)

5.Remove shunt from receptable and plug in condensate pump. (See Figure 5C)

NOTE:

Do not discard shunt that is removed from receptable. This must be replaced if unit is to be operated without condensate pump.

CONDENSATEPUMPHASPRESSURE

ADD

PLASTIC

HOSE

SWITCH THAT CYCLES

FROM BIN

DRAIN

ITS PUMP.

DIRECTLY

TO

PUMP

/ a

%”

ID TUBE

 

CONNECT THE DRAIN

(observe local codes)

1 Th e unrt IS provrded with a gravity drain

2 The ideal installation has a standpipe (1’14” mrnimum) installed directly below the outlet of the drawn tube. Refer lo Figure 5 for the proper location of the standpipe.

3 It may be desirable to insulate drain line thoroughly up to drain Inlet.

RIGHT END VIEW

BACK VIEW

FIGURE 5

 

 

 

I

VALVE

 

 

 

 

 

 

1/4”O.D.

WATER

/

 

4

4” LONG

5/0”

I.D.

RUBBEF

LINE COMPRESSION

 

 

 

DRAIN

TUBE

- RUN TO

FITTING

AT

WATER

 

 

------I<

I

, OPEN DRAIN

 

 

VALVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

l-1/4”

MINIMUM

 

 

 

 

 

 

 

 

HOLE

FOR

FIELD

 

 

 

 

 

 

3”

SUPPIED

WATER

BEND

FIELD

SUPPLIED

WATER

 

 

 

 

LINE

/

 

 

 

TO

CONNECT

TO

WATER

VALVE

FITTING

 

 

 

 

 

 

 

RCORD THIS HOLE

SUPPLIED

RLINE THIS HOLE

Page 3 Page 5
Page 4
Image 4
KitchenAid KUIS185S manual For the Plumber, Connect to Water, Condensate Pump, Connect the Drain
Page 3 Page 5

KUIS185S specifications

The KitchenAid KUIS185S is a state-of-the-art undercounter ice maker that promises to streamline your kitchen experience while delivering the convenience of having ice on hand whenever you need it. Its sleek and modern design fits seamlessly into any kitchen decor, making it not only a functional appliance but also a stylish addition to your home.

One of the standout features of the KUIS185S is its impressive ice production capability. With the ability to produce up to 50 pounds of clear, crescent-shaped ice in a 24-hour period, this ice maker ensures that you will never run out of ice during your gatherings or celebrations. The ice storage bin can hold up to 25 pounds of ice, allowing you to have ample supply for any occasion.

The KUIS185S utilizes innovative technology to ensure optimal performance. Equipped with a robust refrigeration system, it maintains a consistent temperature to keep ice from melting too quickly. Its advanced insulation provides excellent thermal retention, further enhancing ice quality and longevity. The unit also features an automatic shut-off function that activates when the bin is full, preventing overfilling and ensuring efficient operation.

Another significant aspect of the KUIS185S is its user-friendly interface. The integrated controls make it simple to adjust settings, and the clear display allows you to monitor the ice-making process easily. The unit is designed with ease of installation in mind, featuring built-in leveling legs and a reversible door for versatile placement options.

In addition to its functional benefits, the KitchenAid KUIS185S is designed with user convenience in mind. The removable ice bin makes it easy to transport ice to your serving area, and the unit's stainless steel exterior is not only durable but also easy to clean, ensuring that maintenance is straightforward.

Overall, the KitchenAid KUIS185S undercounter ice maker is an excellent choice for anyone looking to enhance their kitchen’s functionality. With its high production capacity, innovative technology, and sleek design, it is sure to meet the ice needs of any household or entertaining space, providing an effortless solution for ice production that combines style and practicality.
Top Page Image Contents