Sennheiser EK 500 G2 manual Specifications

Specifications

RF characteristics

Modulation

Frequency ranges

Receivingfrequencies

Switching bandwidth Nominal/peak deviation Frequency stability Receiver principle Sensitivity

(with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking

Squelch

wideband FM

518–554, 626–662, 740–776, 786–822, 830–866 MHz

8 channel banks with up to 20 factory-preset channels each

1channel bank with up to

20 freely selectable channels (1440 frequencies, tunable in steps of 25 kHz)

36 MHz

±24 kHz / ± 48 kHz ≤± 15 ppm

non diversity

<2.5 μV at 52 dBArms S/N

≥70 dB

≥70 dB

≥80 dB

4 steps: OFF

LO: 5 dBμV MID:15 dBμV HI: 25 dBμV

AF characteristics
Noise reduction system	Sennheiser HDX
AF frequency response
	40–18,000 Hz
S/N ratio (at 1 mV and peak
	≥ 115 dB(A)
deviation)
THD (at nominal deviationand
	≤ 0.9 %
1 kHz)
AF output voltage
	3.5 mm jack socket,
(at peak deviation 1 kHzAF)	balanced: +17 dBu
Overall unit

Temperature range Power supply Power consumption Power consumption with switched-off receiver

– 10 °C to + 55 °C

2 AA size batteries, 1.5 V

approx. 150 mA

≤250 μA

Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm] Weight (incl. batteries)

8–12 hours (depending on volume)

8–12 hours (depending on volume)

82 x 64 x 24

approx. 158 g

30