Recommendations and tips

... for optimum reception

yTransmissionrange depends to a large extent on location and can vary from about 10 m to about 150 m. There should be a “free line of sight” between transmittingand receivingantennas.

yTo avoid overmodulating the receiver, observe a minimum distance of 5 m between transmitting and

receivingantennas.

... for multi-channel operation

y For multi-channel operation, you can only use the channels ina channelbank. Eachof the channelbanks “1” to “8” accommodates up to 20 factory-preset frequencies which are intermodulation-free. For alternative frequency combinations, please refer to the enclosed frequency table. The freely selectable frequencies can be selected via the “TUNE” menu and can be stored in the channel bank “U”.

y When using several transmitters simultaneously, interference can be avoided by maintaining a minimum distance of 20 cm between two transmitters.

Care and maintenance

Use a slightly dampclothto clean the receiver from time to time.

Note:

Do not use any cleansing agents orsolvents.

27

Page 27
Image 27
Sennheiser EK 500 G2 Care and maintenance, Recommendations and tips, For optimum reception, For multi-channel operation