Sennheiser EK 500 G2 manual Selecting the standard display Dislpy, Entering a name Name

Selecting the standard display – DISLPY

Via the “DISPLY” menu, youcanselect the standarddisplay:

Selectable standard display Contents of standard display

“FREQ”

“NAME”

“CHAN”

Entering a name – NAME

Via the “NAME” menu, you can enter a freely selectable name for the receiver. You can, for example, enterthe name of the performer for whom the adjustments have been made.

The name can be displayed onthe standard display andcan consist of up to six characters suchas:

yletters (without pronounciation marks),

ynumbers from 0 to 9,

yspecial characters e.g. () - . _ and spaces.

To enter a name, proceedas follows:

Press the SET button to get into the setting mode of the “NAME” menu. The first segment starts flashing on the display.

With the / rocker button you can now select a character. By briefly pressing a button, the display jumps either forwards or backwards to the next character. If you hold down a button, the display starts cycling continuously.

Press the SET buttonto change to the next segment and select the next character.

Have you entered the name completely? Press the SET button to store your setting and to return to the top menu level.

Loading the factory-preset default settings – RESET

Via the “RESET” menu, you can load the factory-preset default settings. Onlythe selectedsetting for thepilot tone remainsunchanged.Afterthereset, thereceiver isrestarted and thestandarddisplay is shown onthe displaypanel.

24