are correctedcorrespondingly. Due to themissingsen- sor, individual rechargeable battery cells will not be identifiedas accupacks.
yThe monitoring of the accupack temperature during chargingin the L 2015 charger.
yThe prevention of improper charging of inserted pri- mary cells (batteries). Due to the missing sensor, indi- vidual rechargeable battery cells will also not be charged in the L 2015 charger.
Connecting units to the audio output
You can connect a PAsystem ora recording unit (e.g. video camera) to the receiver.
Connect one of the supplied line output cables to the recordingunit.
Connect the 3.5 mm jack plug to the audio output (AF OUT) .
Lock the 3.5 mm jack plug by screwing down the coupling ring.
Via the operating menu, adapt the level of the audio output (AF OUT) to the input sensitivity of the connected unit (see “Adjusting the audio output level” on page23).
Mounting the receiver to a camera
Use the supplied camera kit to mount the receiver to the camera’s flash mount.
The camera kit consits of:
y1 perforated plate
y1 flash mount adapter
y2 square nuts
Determine where on the perforated plate the flash mount adapter will need to be fastened so that the receiver can best be attachedto the camera.
At this position, place a square nut | under the |
perforatedplate . |
|
12
