Timer

The Timer can be set in minutes and seconds, up to 90 minutes, and counts down the set time. The Minute Timer does not start or stop the microwave oven.

When the Timer is in use, the microwave oven can still operate. To see the time countdown while the microwave oven is is use, touch TIMER SET/OFF.

To Set: Touch TIMER SET/OFF. Turn dial to set length of time. Press. Turn dial to Start. Press.

To Cancel: Touch TIMER SET/OFF.

Child Lock

The Child Lock shuts down the control panel pads to prevent unintended use of the microwave oven.

When the control is locked, only the FAN ON/OFF and LIGHT ON/OFF pads will function.

The Child Lock is preset unlocked, but can be locked. Before locking, make sure the microwave oven and Timer are off.

To Activate Child Lock:

1.Touch FIRST SCREEN pad.

2.Turn dial to Custom. Press.

3.Turn dial to Child Lock. Press.

4.Turn dial left to Closed. Press.

“Locked” will appear in the display screen if any attempt is made to start the microwave oven. As long as the Child Lock is activated, a lock icon will appear and remain in the upper, right-hand corner of the FIRST SCREEN.

To Deactivate Child Lock:

1.Repeat steps 1-3 above.

2.Turn dial right to Open. Press.

Exhaust Fan

The exhaust fan has a range of speeds of 0-100%.

To protect the microwave oven, if the temperature from the range or cooktop below the microwave oven gets too hot, the exhaust fan will automatically turn on at the 100% speed. It may stay on for up to one hour. When this occurs, the FAN ON/OFF pad will not function.

Two seconds after the last time the FAN ON/OFF pad is touched, the screen returns to the previous display.

The first time the exhaust fan is turned on after power is connected to the microwave oven, the fan will start at minimum speed. The next time the exhaust fan is turned on, it will start at the last speed used.

To Turn Exhaust Fan On/Off: Touch the FAN ON/OFF pad to turn fan on, then touch (▲) or (▼) arrows to increase or decrease speed. Touch the FAN ON/OFF pad to turn the fan off.

Cooktop/Countertop Light

The cooktop/countertop light has brightness settings ranging from 0-100%. The light can be turned on manually, or the Nite Lite can be programmed to come on automatically, when the sensor detects low light level.

To Manually Turn Light On/Off: Touch LIGHT ON/OFF pad to turn light on. Touch the (▲) or (▼) arrows to set desired brightness level. Touch LIGHT ON/OFF pad to turn light off.

To Set the Sensor for Nite Light:

1.Touch FIRST SCREEN pad.

2.Turn dial to Custom. Press.

3.Turn dial to Set Level. Press.

4.Turn dial to the desired activation level, from 0-100%. Press.

The display will show the current room light level as well as the activation level setting. The current room light level will fluctuate based upon current light conditions.

Learning Mode

The Learning Mode is ideal for learning how to use the microwave oven. When set, functions can be entered, with real displays and tones, without actually turning on the magnetron. While functions are operating in the Learning Mode, the microwave oven light will come on, the fan will run, and the turntable will rotate (if set ON).

Before activating, make sure the microwave oven and Minute Timer are off.

To Activate Learning Mode:

1.Touch FIRST SCREEN pad.

2.Turn dial to Custom. Press.

3.Turn dial to Learning Mode. Press.

4.Turn dial to On. Press.

5.Turn dial to desired function. Press.

The book icon will appear at times to indicate that the oven is operating without microwave power.

To Deactivate Learning Mode:

1.Repeat steps 1-3 above.

2.Turn dial to Off. Press.

Demo Mode

The Demo Mode demonstrates the features and capabilities of the microwave oven, featuring the MICRO-DIAL™ System.

To Activate Demo Mode:

1.Touch FIRST SCREEN pad.

2.Turn dial to Demo Mode. Press.

3.Press dial to activate Demo Mode.

A video demonstration is played on the display screen.

9

Page 9
Image 9
KitchenAid MICROWAVE HOOD manual Timer, Child Lock, Exhaust Fan, Cooktop/Countertop Light, Learning Mode, Demo Mode