arb
Food Pusher
Thick Slicer
Coarse Shredder
Housing
Shaft | Thin Slicer Fine Shredder |
TO ATTACH:
2 3
1
TO ASSEMBLE:
A B
Before attaching accessory, turn off and unplug unit.
Loosen attachment knob (1) by turn- ing it counterclockwise. Remove attachment hub cover. Insert attach- ment shaft housing (2) into attachment hub (3) making certain that attach- ment power shaft fits into square hub socket. Rotate attachment back and forth if necessary. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim. Tighten attachment knob until attachment is completely secured to mixer.
Attach shaft (A) to desired cone (B). Insert square end of shaft in square opening of housing and tighten by turning cone clockwise. Reverse to remove. Insert the cone assembly into housing (C) so shaft fits into square hub socket. As you insert the cone assembly, lift up on the latch (D) and turn the cone assembly until it fits squarely in the attachment hub.
C | D |
3
