KitchenAid W10078153B Custom panel dimensions, For dishwashers with the control panel shown below

9.Install the two #8-18 x 1-3/8" screws from the literature package in the top corners, as shown. Align top edges of full front panel and console; tighten corner screws.

2 screws

align top edges

1-3/8"screw

10.Tighten the two side screws reinstalled in Step 8.

11.Reinstall and tighten the three remaining side screws.

Custom panel dimensions

IMPORTANT: You need to know what control panel is on your dishwasher before you order your custom door panel.

For dishwashers with the control panel shown below:

(models KUDS03FTPA and KUDU03FTPA)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

23-1/2" (59.7 cm) *30-3/16" (76.7 cm)

3/4" (19.1 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

Follow directions under Option #1 of “Install custom panel” section.

For dishwashers with the control panel shown below: (Models KUDC03IT, KUDK03IT and KUDL03IT)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

	*25-29/32" (65.8 cm)
23-3/8" (59.4 cm)

3/4" (19.1

mm)

1/8" (3.2 mm)

1/8" (3.2 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

Follow directions in Option #2 of “Install custom panel” section.

12