Emerson 400501-05 installation manual ECI-44 External Connector Interface, Dimensions of ECI-44

Epsilon Eb Digital Servo Drive Installation Manual

ECI-44 External Connector Interface

The ECI-44 allows access to all command and input and output signals. The ECI-44 should be mounted close to the drive and away from any high voltage wiring. The ECI-44 comes complete with the hardware necessary for mounting to most DIN rail mounting tracks.

Figure 39: Dimensions of ECI-44

Note

Shield connection points are connected to the shell of the 44-pin “D” connector on the ECI-44. Also, the shield connection points of the ECI-44 are also designed to provide a point for cable strain relief.

Use tie wraps to provide a strain relief and a ground connection at the shield connection points.

If you do not wish to use the DIN rail mounting hardware, the ECI-44 can be disassembled and the mounting clips removed.

The ECI-44 wire range is #18 to 24 AWG stranded insulated wire.

Note

Wiring should be done with consideration for future troubleshooting and repair. All wiring should be either color coded and/or tagged with industrial wire tabs. Low voltage wiring should be routed away from high voltage wiring.

44