Emerson Epsilon Eb Digital Servo Drive, 400501-05 installation manual Supplementary information

	Declaration of Conformity
Manufacturer’s Name:	Control Techniques
	12005 Technology Drive
Manufacturer’s Address:	Eden Prairie, MN 55344
	USA

	Declares that the following products:
Products Description:	Epsilon Digital Servo Drive
Model Number:	Eb-202, Ei-202, Eb-203, Ei-203, Eb-205 and Ei-205
System Options:	This declaration covers the above products with the ECI-44 Screw
	Terminal Interface.

Conforms to the following product specification:

Electomagnetic Compatibility (EMC):

EN 55011/1991 Class A Group 1, CISPR 11/1990 Class A Group 1

	IEC 1000-4-2/1995; EN 61000-4-2, 6kV CD
	IEC 1000-4-3/1995; EN 61000-4-3, ENV 50140/1993, 80% AM,
EN 61800-3, 1996:	10V/m @ 3 m
	IEC 1000-4-4/1995; EN 61000-4-4, 2 kV ALL LINES
	EN 61000-4-5, 1kV L-L, 2kV L-G
	EN 61000-4-11, 300 ms/1000 ms 100% DIP
	ENV 50204/1995, Pulse, 900 MHz, 50% DTY, 200 Hz

Supplementary information:

The products herewith comply with the requirements of the Low Voltage Directive (LVD) 73/23/EEC and EMC

Directive 89/336/EEC

This electronic drive product is intended to be used with an appropriate motor, electrical protection components and other equipment to form a complete end product or system. It must only be installed by a professional assembler who is familiar with requirements for safety and electromagnetic compatibility (“EMC”). The assembler is

responsible for ensuring that the end product or system complies with all the relevant laws in the country where it is
to be used. Refer to the product manual for installation guidelines.
	August 18, 1999
Bradley Schwartz/ VP Engineering	Date
	Sobetra Automation

European Contact:	Langeveldpark Lot 10
	P. Dasterleusstraat 2
	1600 St. Pieters Leeuw, Belgium

xi