Are the controls not set correctly for the surrounding conditions? See “Using the Control(s).”

Are the doors not closed completely? Close the doors firmly. If they do not close completely, see “The doors will not close completely” later in this section.

Are the door gaskets not sealed all the way around? Contact a technician or other qualified person.

NOTE: Your new refrigerator will run longer than your old one due to its high-efficiency motor.

The refrigerator seems to make too much noise

The sounds may be normal for your refrigerator. See “Normal Sounds.”

The ice maker is not producing ice or not enough ice

Has the ice maker just been installed? The ice bin holds

14 to 17 lbs (6.4 to 7.7 kg) of ice. The ice bin can take three to four days to completely fill, if no ice is used during this time.

Is the freezer temperature cold enough to produce ice? Wait 24 hours after ice maker hookup for ice production. See “Using the Control(s).”

Is the ice maker wire shutoff arm in the OFF (arm up) position (on some models)? Lower the wire shutoff arm to the ON (arm down) position. See “Ice Maker and Storage Bin.”

Is the ice maker switch in the OFF (right) position (on some models)? Move ice maker switch to the ON (left) position. See “Ice Maker and Storage Bin.”

Is the water line shutoff valve to the refrigerator turned on? Turn on the water valve. See “Connect Water Line to Refrigerator” in the Installation Instructions.

Does the ice maker mold have water in it or has no ice been produced? Make sure your refrigerator has been connected to a water supply and the supply shutoff valve is turned on. See “Connect Water Line to Refrigerator” in the Installation Instructions.

Is an ice cube jammed in the ice maker ejector arm? For models with an interior ice bin, remove the ice from the ejector arm with a plastic utensil. For models with an ice bin located on the freezer door, access the ice maker by depressing the ice sensor door on the upper left side of the freezer interior. While depressing the sensor door, lift the ice maker service door and remove the ice from the ejector with a plastic utensil. See “Ice Maker and Storage Bin.”

Has a large amount of ice just been removed? Allow three to four days for an empty ice bin to completely fill, if no ice is used during this time.

Are the controls set correctly? See “Using the Control(s).”

Is there a water filter installed on the refrigerator? The filter may be clogged or installed incorrectly. Check the filter installation instructions to ensure that the filter was installed correctly and is not clogged. If installation or clogging is not a problem, call a technician or other qualified person.

NOTE: If not due to any of the above, there may be a problem with the water line. Call for service.

Off-taste, odor or gray color in the ice

Are the plumbing connections new, causing discolored or off-flavored ice? Discard the first few batches of ice.

Have the ice cubes been stored too long? Throw old ice away and make a new supply.

Does the freezer and ice bin need to be cleaned? See “Cleaning” or “Ice Maker and Storage Bin.”

Has food in the freezer or refrigerator been wrapped properly? Use airtight, moisture-proof packaging to avoid odor transfer from stored food.

Does the water contain minerals (such as sulfur)? A filter may need to be installed to remove the minerals.

Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Run additional water through the water dispenser to flush the water filtration system more thoroughly (at least 6 qt. [5.7 L] or 3 to 4 minutes initially). Discard discolored ice.

The ice dispenser will not operate properly

Is the freezer door closed completely? Push the door firmly shut. If it will not shut all the way, see “The doors will not close completely” later in this section.

Is the ice bin installed correctly? For models with an interior ice bin, push the ice bin in all the way. If the ice bin does not go in all the way, it may not be put in straight. Pull it out and try again. For models with an ice bin located on the freezer door, the bin should sit level. To remove the bin, press the release button on the right side of the bin and lift straight up. Replace the bin in the door making sure it is properly aligned and snapped securely into place. See “Ice Maker and Storage Bin.”

Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker. If other cubes have been added, remove all cubes and check to see that none have become stuck in the delivery chute.

Has the ice frozen in the ice bin? Shake the ice bin to separate cubes. If cubes do not separate, empty bin and wait 24 hours for ice to restock.

Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

Is ice stuck in the delivery chute? Clear the ice from the delivery chute with a plastic utensil. Do not use anything sharp to remove the ice. You could cause damage.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

Is the ice dispenser stalling while dispensing “crushed” ice? Stop dispensing ice. Change the ice button from “crushed” to “cubed.” Depress the ice dispenser arm using a sturdy glass. If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again. See “Water and Ice Dispensers.”

Is there ice in the bin? See “The ice maker is not producing ice” earlier in this section.

16

Page 16
Image 16
KitchenAid W10161714A manual Refrigerator seems to make too much noise, Ice maker is not producing ice or not enough ice

W10161714A specifications

The KitchenAid W10161714A is an exceptional appliance designed to enhance the efficiency and convenience of modern kitchens. This versatile kitchen tool stands out due to its multiple functionalities, catering to a wide range of culinary tasks from mixing and chopping to blending and pureeing.

One of the key features of the W10161714A is its powerful motor, which delivers consistent performance while handling a variety of ingredients. This ensures that even the toughest of tasks, such as kneading dough or blending thick mixtures, are completed with ease. The appliance also comes equipped with multiple speed settings, allowing users to tailor the mixing process according to the recipe requirements.

The design of the KitchenAid W10161714A is as functional as it is visually appealing. Its robust construction gives it a durable quality, while the sleek aesthetic seamlessly fits into any kitchen decor. The appliance is also user-friendly, with intuitive controls that simplify operations. The large capacity bowl is perfect for preparing sizable batches, making it ideal for families or those who enjoy entertaining guests.

In terms of technology, the KitchenAid W10161714A is equipped with a unique planetary mixing action. This innovative system ensures that ingredients are mixed thoroughly, as the attachment rotates in one direction while the bowl rotates in the opposite direction. This feature guarantees even mixing without any unmixed portions, improving the overall consistency of the food being prepared.

Safety is another crucial aspect of the W10161714A. The appliance is designed to prevent overheating while operating under heavy loads, ensuring longevity and reliability. Additionally, the model features a secure locking mechanism that keeps the bowl and attachments in place during use.

Another characteristic that adds to its appeal is the versatility in attachments available for the KitchenAid W10161714A. Users can expand their culinary capabilities by purchasing additional accessories, like spiralizers and food processors, which enhance the appliance's functionality even further.

In conclusion, the KitchenAid W10161714A is not just a kitchen appliance, but a valuable culinary partner, combining power, versatility, and a user-friendly design. With its multitude of features and advanced technologies, it transforms the cooking experience, making meal preparation not only easier but also more enjoyable for cooks of all skill levels. Whether you're a novice or a seasoned chef, this appliance has something to offer for everyone.