Water Filter Indicator

To Dispense Ice:

1.Press the button to select the desired type of ice.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2.Press a sturdy glass against the ice dispenser pad. Hold the glass close to the dispenser opening so ice does not fall outside of the glass.

IMPORTANT: You do not need to apply a lot of pressure to the pad in order to activate the ice dispenser. Pressing hard will not make the ice dispense faster or in greater quantities.

3.Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds after removing the glass from the pad. The dispenser may continue to make noise for a few seconds after dispensing.

Dispenser Tray with Water Level Indicator (on some models)

Your dispenser may include a small tray at the bottom of the dispenser. It is designed to catch small spills and allow for easy cleaning. The tray can be removed from the dispenser and carried to the sink to be emptied or cleaned.

NOTE: There is no drain in the tray. When the tray is full of water and needs to be emptied, a small red indicator pops up at the back of the tray.

Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may choose either ON or AUTO.

ON: Press LIGHT to turn the dispenser light on.

AUTO: Press LIGHT a second time to select AUTO mode. The dispenser light will automatically adjust to become brighter as the room brightens, dimmer as the room darkens.

OFF: Press LIGHT a third time to turn the dispenser light off.

The dispenser lights are LEDs that can not be changed. If it appears that your dispenser lights are not working, be sure that the light sensor is not blocked (in AUTO mode). See “Troubleshooting” for more information.

Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the product, to the ice maker, or to the dispenser light. It simply deactivates the ice and water dispensers. To turn off the ice maker, see “Ice Maker & Storage Bin.”

■Press and hold LOCK for 3 seconds to lock the dispenser. While the dispenser is locking, “LOCKING” will appear on the display screen and the blue indicator light around the LOCK button will flash. When the dispenser is locked, the indicator light will change to red for a few seconds, then turn off.

■Press and hold LOCK a second time to unlock the dispenser. While the dispenser is unlocking, “UNLOCKING” will appear on the display screen and the red indicator light around the LOCK button will flash. When the dispenser is unlocked, the indicator light will change to blue for a few seconds, then turn off.

Water Filter Status Light (on some models)

The water filter status light and display screen help you know when to change your water filter. Press the FILTER button to check the status of your water filter.

If the filter is new:

You must press FILTER to view the filter’s status. For a few seconds, the status light will be blue and the display screen will show what percentage of your filter’s life remains.

If it is almost time to change the filter:

The status light will automatically illuminate and will remain on, appearing yellow. The words “ORDER FILTER” will appear on the display screen. Press FILTER to see what percentage of your filter’s life remains. You should order the appropriate replacement filter. See “Accessories.”

If it is time to change the filter:

The status light will remain on, changing to red. The words “REPLACE FILTER” and “HOLD BUTTON TO RESET” will appear on the display screen until the filter has been changed and the status light has been reset.

To reset the water filter status light:

After changing the filter, reset the status light by pressing and holding the FILTER button for 3 seconds. The status light will blink red and change to blue, then turn off when the system is reset.

(on some models)

The water filter indicator, located on the control panel, will help you know when to change the water filter.

A new water filter should display a reading of 99%. The reading in the display will decrease as the filter life is used. A replacement water filter should be ordered when “Order Filter” is displayed. It is recommended that you replace the filter when “Change Filter” is displayed or when water flow to your water dispenser and/or icemaker decreases noticeably. See “Changing the Water Filter” later in this section.

After changing the water filter, press and hold RESET for 2 seconds until the status display changes to 99%.

W10161714A specifications

The KitchenAid W10161714A is an exceptional appliance designed to enhance the efficiency and convenience of modern kitchens. This versatile kitchen tool stands out due to its multiple functionalities, catering to a wide range of culinary tasks from mixing and chopping to blending and pureeing.

One of the key features of the W10161714A is its powerful motor, which delivers consistent performance while handling a variety of ingredients. This ensures that even the toughest of tasks, such as kneading dough or blending thick mixtures, are completed with ease. The appliance also comes equipped with multiple speed settings, allowing users to tailor the mixing process according to the recipe requirements.

The design of the KitchenAid W10161714A is as functional as it is visually appealing. Its robust construction gives it a durable quality, while the sleek aesthetic seamlessly fits into any kitchen decor. The appliance is also user-friendly, with intuitive controls that simplify operations. The large capacity bowl is perfect for preparing sizable batches, making it ideal for families or those who enjoy entertaining guests.

In terms of technology, the KitchenAid W10161714A is equipped with a unique planetary mixing action. This innovative system ensures that ingredients are mixed thoroughly, as the attachment rotates in one direction while the bowl rotates in the opposite direction. This feature guarantees even mixing without any unmixed portions, improving the overall consistency of the food being prepared.

Safety is another crucial aspect of the W10161714A. The appliance is designed to prevent overheating while operating under heavy loads, ensuring longevity and reliability. Additionally, the model features a secure locking mechanism that keeps the bowl and attachments in place during use.

Another characteristic that adds to its appeal is the versatility in attachments available for the KitchenAid W10161714A. Users can expand their culinary capabilities by purchasing additional accessories, like spiralizers and food processors, which enhance the appliance's functionality even further.

In conclusion, the KitchenAid W10161714A is not just a kitchen appliance, but a valuable culinary partner, combining power, versatility, and a user-friendly design. With its multitude of features and advanced technologies, it transforms the cooking experience, making meal preparation not only easier but also more enjoyable for cooks of all skill levels. Whether you're a novice or a seasoned chef, this appliance has something to offer for everyone.

KitchenAid W10161714A manual Water Filter Indicator

Models: W10161714A