NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”), located on the right wall of the freezer door, stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the bin by sliding it onto the door, then tilting it back into an upright position. The release lever will click when the bin is securely in place.

Style 2

Turning the Ice Maker On/Off:

To turn ON the ice maker, simply lower the wire shutoff arm.

To manually turn off the ice maker, lift the wire shutoff arm to the OFF (arm up) position and listen for the click. Ice can still be dispensed, but no more can be made.

NOTE: The ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

Removing and Replacing Ice Storage Bin:

1.Pull the covering panel up from the bottom.

2.Lift the wire shutoff arm so it clicks into the OFF (up) position.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work.

5.To restart ice production, push the wire shutoff arm down to the ON position. Make sure the door is closed tightly.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Water Filter Status Light

The water filter status light will help you know when to change your water filter.

When the dispenser control panel’s water filter status display changes to “ORDER,” this tells you that it is almost time to change the water filter cartridge.

Replace the water filter cartridge when the water filter status display changes to “REPLACE.”

If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months, depending on your water quality and usage.

After changing the water filter, reset the status light. Press the OPTIONS button to enter Options mode, then press LOCK to initiate the reset, then press MEASURED FILL to confirm that you want to reset the status light. When the system is reset, the “ORDER” and “REPLACE” icons will disappear from the display screen.

Changing the Water Filter

1.Locate the water filter in the top-right corner of the refrigerator compartment.

2.Lift open the filter cover door. The filter will be released and then eject as the door is opened.

3.When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling may occur. Use a towel to wipe up any spills.

4.Take the new filter out of its packaging and remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.

5.With the arrow pointing up, align the new filter with the filter housing and slide it into place. The filter cover door will automatically begin to close as the new filter is inserted.

6.Close the filter cover door completely in order to snap the filter into place. You may need to press hard.

7.Flush the water system. See “Water and Ice Dispensers.”

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1.Unplug refrigerator or disconnect power.

2.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

8

Page 8
Image 8
KitchenAid W10168322A warranty Refrigerator Care, Water Filtration System, Cleaning

W10168322A specifications

The KitchenAid W10168322A is a versatile and durable kitchen appliance designed to enhance the cooking experience for home chefs. This model is primarily known as a replacement part in various KitchenAid appliances, including dishwashers, making it a crucial component in maintaining the functionality of these kitchen essentials.

One of the standout features of the W10168322A is its robust construction. Made with high-quality materials, it promises longevity and reliability in the kitchen environment. The component is designed to withstand the consistent wear and tear of regular use, ensuring that your KitchenAid appliance remains in excellent working condition.

The W10168322A incorporates advanced technologies that make it user-friendly and efficient. Its design ensures that it fits seamlessly into compatible models, making installation straightforward. Homeowners can easily replace worn or malfunctioning parts without needing professional assistance, which saves both time and money. The appliance part is engineered to deliver optimal performance, which contributes to the efficient functioning of your dishwasher.

This KitchenAid model features a smooth operation that minimizes noise, allowing you to maintain a peaceful cooking environment. The appliance part is designed to provide excellent water drainage, preventing any leaks and ensuring that your dishes come out spotless after every wash. Additionally, the durability of the components guarantees that they can handle high water temperatures and aggressive detergents without degrading.

Another characteristic that sets the W10168322A apart is its compatibility with a range of KitchenAid dishwasher models. This broad compatibility allows users to replace parts with confidence, knowing that they are selecting a solution specifically designed for their appliance needs.

In summary, the KitchenAid W10168322A is an essential component for anyone looking to keep their KitchenAid dishwasher running smoothly. With its quality construction, easy installation, advanced technologies, and compatibility with various models, this part ensures that home chefs can continue to enjoy the convenience of a reliable kitchen appliance. Investing in the W10168322A means investing in quality, efficiency, and peace of mind in your cooking space.