1.Press the number pads to enter a probe temperature. The probe temperature can be set between 130°F and 190°F (54°C and 88°C).

2.Press BAKE, CONVECT BAKE or CONVECT ROAST.

Press number pads to enter a temperature other than the one displayed.

3.Press START.

The set oven temperature will appear on the oven display throughout cooking.

“Lo” will appear as the probe temperature until the internal temperature of the food reaches 130°F (54°C) or if the probe is unplugged. Then the display will show the temperature increasing in 1°F increments.

When the set probe temperature is reached, the oven will shut off automatically and “Cooking Complete” will appear on the oven display.

If enabled, end-of-cycle tones will sound.

4.Press OFF or open the oven door to clear the display.

To Change Probe Temperature, Oven Setting:

Press OFF, then repeat previous steps.

After cooking, unplug the probe and remove food from oven. The probe symbol will remain lit until the probe is unplugged from the probe jack.

See “General Cleaning” section to clean probe.

Oven Vent

A

A. Oven vent

The oven vent should not be blocked or covered since it allows the release of hot air and moisture from the oven. Blocking or covering the vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

RACKS

■Position racks before turning on the oven.

■Do not position racks with bakeware on them.

■Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration and charts as a guide.

5

4

3

2

1

Traditional Cooking

FOOD

RACK POSITION

Large roasts, turkeys, angel food,

1 or 2

bundt and tube cakes, quick

 

breads, pies

 

 

 

Yeast breads, casseroles, meat and

2

poultry

 

 

 

Cookies, biscuits, muffins, cakes

2 or 3

 

 

Convection Cooking

FUNCTION

NUMBER OF

RACK

 

RACKS USED

POSITION(S)

 

 

 

Convection baking or

1

1, 2 or 3

roasting

 

 

 

 

 

Convection baking

2

2 and 4

 

 

 

Convection baking

3

1, 3 and 5

 

 

 

BAKEWARE

To cook food evenly, hot air must be able to circulate. Allow 2" (5 cm) of space around bakeware and oven walls. Use the following chart as a guide.

NUMBER

POSITION ON RACK

OF PAN(S)

 

 

 

1Center of rack.

2Side by side or slightly staggered.

3 or 4

Opposite corners on each rack. Make sure that

 

no bakeware piece is directly over another.

Bake

The BAKE function is ideal for baking, roasting or heating foods.

During baking or roasting, the bake and broil elements will cycle on and off in intervals to maintain oven temperature.

If the oven door is opened during baking or roasting, the broil element will turn off immediately and the bake element will turn off in 30 seconds to 2 minutes. They will come back on once the door is closed.

20

Page 19 Page 21
Page 20
Image 20
KitchenAid W10190622A, KESS908SPS manual Oven Vent, Positioning Racks and Bakeware
Page 19 Page 21

KESS908SPS, W10190622A specifications

The KitchenAid W10190622A and KESS908SPS are exemplary kitchen appliances that combine functionality and style, making them perfect additions to any modern kitchen. Designed with the home chef in mind, both units offer a multitude of features designed to enhance culinary experiences.

The KitchenAid W10190622A is a versatile wall oven that showcases an impressive array of cooking technologies. It features a true convection system which utilizes a third heating element and a fan to circulate hot air throughout the oven. This ensures even baking and allows dishes to cook more consistently and efficiently. The oven also boasts an easy-to-use intuitive touchscreen interface, allowing users to select cooking modes, set timers, and access recipes with a simple swipe. Another standout feature is the self-cleaning mode, which simplifies maintenance by utilizing high temperatures to burn off residue, leaving the oven clean and ready for the next cooking adventure.

On the other hand, the KESS908SPS is a sleek and stylish slide-in range that offers one of the most advanced cooking technologies available. This model is equipped with a powerful induction cooktop that provides fast and precise heating. The induction burners heat only the cookware, which means less wasted energy and a safer cooking environment. The range includes multiple cooking elements, each with various power levels, making it adaptable to all types of cooking, from simmering sauces to searing meats.

Both appliances share an aesthetic appeal, featuring a modern stainless-steel finish that complements any kitchen decor. The KESS908SPS also includes a large oven cavity with multiple rack positions, allowing for cooking multiple dishes at once. Additionally, both models feature smart technology integration, enabling users to monitor and control their cooking appliances remotely via a smartphone app. This ensures complete control over the cooking process, even when the user is not in the kitchen.

In conclusion, the KitchenAid W10190622A and the KESS908SPS provide exceptional cooking performance with their innovative technologies and user-friendly features. Their stylish design makes them an attractive addition to any culinary space, while their advanced functionalities simplify cooking tasks and optimize results, appealing to both novice cooks and seasoned chefs alike.
Top Page Image Contents