Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely,” earlier in this section.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

The water dispenser will not operate properly

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? Straighten the water source line.

■New installation? Flush and fill the water system. See “Water Dispenser.”

■Is the water pressure at least 35 psi (241 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely,” earlier in this section.

■Recently removed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected. See “Refrigerator Door(s) and Drawer.”

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

12

Page 11 Page 13
Page 12
Image 12
KitchenAid W10326028A, KFCS22EVMS installation instructions Temperature and Moisture, Ice and Water
Page 11 Page 13

KFCS22EVMS, W10326028A specifications

The KitchenAid W10326028A is an essential accessory designed specifically for the KFCS22EVMS refrigerator model. This replacement part is pivotal for maintaining optimal fridge operation, ensuring that your culinary storage needs are met effortlessly. The W10326028A, commonly known as the refrigerator door bin, is crafted to enhance organization within your refrigerator, allowing for easy access to items such as condiments, bottles, and small snack packs.

One of the standout features of this door bin is its robust design, which is tailored to withstand the everyday wear and tear of a bustling kitchen environment. Made from high-grade, BPA-free plastic, the bin promises longevity while also contributing to a hygienic storage option. Its transparency allows you to quickly identify contents, making meal preparation and grocery management seamless.

The KFCS22EVMS itself is a feature-rich refrigerator that embodies KitchenAid's commitment to innovation and user-friendly technology. One remarkable technology integrated into this model is its advanced cooling system, which ensures that the temperature remains consistent, preserving food freshness for an extended time. The refrigerator employs a dual evaporator system, which separates the refrigerator and freezer airflow. This prevents the transfer of odors and maintains an ideal humidity level within the fridge, so fruits and vegetables last longer.

Moreover, the KFCS22EVMS boasts an impressive energy efficiency rating, which not only helps reduce your utility bills but also lessens environmental impact. Its sleek stainless steel exterior is not just about aesthetics; it’s also equipped with a fingerprint-resistant coating, making cleaning straightforward and hassle-free.

The refrigerator features adjustable shelves and spacious bins that can be customized for individual storage needs. The additional crispers and humidity-controlled drawers ensure that fresh produce is preserved in optimal conditions.

In summary, the KitchenAid W10326028A is a vital accessory for the KFCS22EVMS refrigerator, enhancing both functionality and organization. With its durable construction and the innovative features of the refrigerator itself, including exceptional cooling technology and energy efficiency, this combination is designed to elevate your kitchen experience. Investing in these elements means embracing modern convenience alongside superb culinary storage solutions.
Top Page Image Contents