2.Use the Freezer (+) or (-) touch pads to scroll through the preference names. When the desired preference name is displayed, press the Refrigerator (+) or (-) touch pads to change the preference status.

3.Set your preferences by pressing and holding the Door Alarm touch pad for 3 seconds, or by shutting the refrigerator compartment door.

Crisper Humidity Control

You can control the amount of humidity in the moisture-sealed crisper. Depending on your model, adjust the control to any setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT / LOW (open) for best storage of fruits and vegetables with skins.

VEGETABLES / HIGH (closed) for best storage of fresh, leafy vegetables.

Ice Maker

IMPORTANT: Flush the water system before turning on the ice maker. See “Water Dispenser.”

Turning the Ice Maker On/Off

To turn the ice maker ON, simply lower the wire shutoff arm.

To manually turn the ice maker OFF, lift the wire shutoff arm to the OFF (arm up) position and listen for the click.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

Auto Ice Storage Bin

Your ice storage bin has a lever which allows the storage bin to slide out with the drawer when it is pulled open or to stay in place.

■Move the lever to the right to attach the ice storage bin to the freezer drawer.

■Move the lever to the left to release the ice storage bin from the freezer drawer.

A

A

A. Ice storage bin lever

Ice Production Rate

■The ice maker should produce a complete batch of ice approximately every 3 hours.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

Remember

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not store anything on top of the ice maker or in the ice storage bin.

Water Dispenser

IMPORTANT:

■After connecting the refrigerator to a water source or replacing the water filter, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser paddle (5 seconds on, 5 seconds off) until a total of 4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTE: After 5 minutes of continuous dispensing, the dispenser will stop dispensing water to avoid flooding. To continue dispensing, press the dispenser paddle again.

■Allow 24 hours for the refrigerator to cool down and chill water. Dispense enough water every week to maintain a fresh supply.

Dispensing Water

1.Hold a container under the dispenser spout while pressing the dispenser pad.

2.Release the dispenser pad to stop dispensing.

Water Filtration System

The water filter is located in the upper right-hand corner of the refrigerator compartment.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Water Filter Status Lights

The water filter status lights will help you know when to change the water filter. When the Order light is on, it is almost time to change the water filter. When the Replace light is on, a new water filter should be installed.

After replacing the water filter, press and hold Filter Reset for

3 seconds until the Order or Replace light turns off. See “Using the Controls.”

9

Page 8 Page 10
Page 9
Image 9
KitchenAid KFCS22EVMS, W10326028A Crisper Humidity Control, Ice Maker, Water Dispenser, Water Filtration System
Page 8 Page 10

KFCS22EVMS, W10326028A specifications

The KitchenAid W10326028A is an essential accessory designed specifically for the KFCS22EVMS refrigerator model. This replacement part is pivotal for maintaining optimal fridge operation, ensuring that your culinary storage needs are met effortlessly. The W10326028A, commonly known as the refrigerator door bin, is crafted to enhance organization within your refrigerator, allowing for easy access to items such as condiments, bottles, and small snack packs.

One of the standout features of this door bin is its robust design, which is tailored to withstand the everyday wear and tear of a bustling kitchen environment. Made from high-grade, BPA-free plastic, the bin promises longevity while also contributing to a hygienic storage option. Its transparency allows you to quickly identify contents, making meal preparation and grocery management seamless.

The KFCS22EVMS itself is a feature-rich refrigerator that embodies KitchenAid's commitment to innovation and user-friendly technology. One remarkable technology integrated into this model is its advanced cooling system, which ensures that the temperature remains consistent, preserving food freshness for an extended time. The refrigerator employs a dual evaporator system, which separates the refrigerator and freezer airflow. This prevents the transfer of odors and maintains an ideal humidity level within the fridge, so fruits and vegetables last longer.

Moreover, the KFCS22EVMS boasts an impressive energy efficiency rating, which not only helps reduce your utility bills but also lessens environmental impact. Its sleek stainless steel exterior is not just about aesthetics; it’s also equipped with a fingerprint-resistant coating, making cleaning straightforward and hassle-free.

The refrigerator features adjustable shelves and spacious bins that can be customized for individual storage needs. The additional crispers and humidity-controlled drawers ensure that fresh produce is preserved in optimal conditions.

In summary, the KitchenAid W10326028A is a vital accessory for the KFCS22EVMS refrigerator, enhancing both functionality and organization. With its durable construction and the innovative features of the refrigerator itself, including exceptional cooling technology and energy efficiency, this combination is designed to elevate your kitchen experience. Investing in these elements means embracing modern convenience alongside superb culinary storage solutions.
Top Page Image Contents