Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Door(s) and Drawer

Graphics are included later in this section.

Remove and Replace Handles

1.Using a ³⁄₃₂" or ¹⁄₈" hex key, loosen the two setscrews located on the side of each handle. See Graphics 1 and 2.

2.Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles.

3.To replace the handles, reverse the directions.

Remove Doors and Hinges

IMPORTANT:

■Remove food and any adjustable door or utility bins from doors.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.”

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, #2 Phillips screwdriver, and a flat-blade screwdriver.

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

NOTE: Remove the hinge pin cover from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

4.Before removing the left-hand side door, disconnect the wiring plug located on top of the top hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Wiring Plug graphic.

5.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

NOTE: Remove the hinge pin cover from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Replace Doors and Hinges

1.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Align the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wiring plug on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

Remove and Replace Freezer Drawer Front

IMPORTANT: Two people may be required to remove and replace the freezer drawer front. Graphics are included later in this section.

Remove Drawer Front

1.Open the freezer drawer to full extension.

2.Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in the drawer front.

3.Lift drawer front upward and off the screws. See Drawer Front Removal graphic.

Replace Drawer Front

1.Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic.

2.Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic.

3.Completely tighten the four screws.

Final Steps

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Return all removable door parts to doors and food to refrigerator.

5

Page 4 Page 6
Page 5
Image 5
KitchenAid KFCS22EVMS, W10326028A installation instructions Refrigerator Doors and Drawer
Page 4 Page 6

KFCS22EVMS, W10326028A specifications

The KitchenAid W10326028A is an essential accessory designed specifically for the KFCS22EVMS refrigerator model. This replacement part is pivotal for maintaining optimal fridge operation, ensuring that your culinary storage needs are met effortlessly. The W10326028A, commonly known as the refrigerator door bin, is crafted to enhance organization within your refrigerator, allowing for easy access to items such as condiments, bottles, and small snack packs.

One of the standout features of this door bin is its robust design, which is tailored to withstand the everyday wear and tear of a bustling kitchen environment. Made from high-grade, BPA-free plastic, the bin promises longevity while also contributing to a hygienic storage option. Its transparency allows you to quickly identify contents, making meal preparation and grocery management seamless.

The KFCS22EVMS itself is a feature-rich refrigerator that embodies KitchenAid's commitment to innovation and user-friendly technology. One remarkable technology integrated into this model is its advanced cooling system, which ensures that the temperature remains consistent, preserving food freshness for an extended time. The refrigerator employs a dual evaporator system, which separates the refrigerator and freezer airflow. This prevents the transfer of odors and maintains an ideal humidity level within the fridge, so fruits and vegetables last longer.

Moreover, the KFCS22EVMS boasts an impressive energy efficiency rating, which not only helps reduce your utility bills but also lessens environmental impact. Its sleek stainless steel exterior is not just about aesthetics; it’s also equipped with a fingerprint-resistant coating, making cleaning straightforward and hassle-free.

The refrigerator features adjustable shelves and spacious bins that can be customized for individual storage needs. The additional crispers and humidity-controlled drawers ensure that fresh produce is preserved in optimal conditions.

In summary, the KitchenAid W10326028A is a vital accessory for the KFCS22EVMS refrigerator, enhancing both functionality and organization. With its durable construction and the innovative features of the refrigerator itself, including exceptional cooling technology and energy efficiency, this combination is designed to elevate your kitchen experience. Investing in these elements means embracing modern convenience alongside superb culinary storage solutions.
Top Page Image Contents