Installation Instructions

Unpack the Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT:

■Do not remove the film covering until the refrigerator is in its operating location.

■All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

■Keep the cardboard shipping piece or plywood under the refrigerator until it is installed in the operating location.

1.Remove and save the literature package bag taped to the side of the refrigerator and the parts bag behind the grille. Remove the four brackets (two on each side) that attach the shipping base to the refrigerator bottom.

NOTE: Do not remove tape and door bracing until the refrigerator is in its final location.

2.If necessary, reduce the tipping radius. See “Tipping Radius” for ceiling height requirements or “Reduce Tipping Radius” for step-by-step instructions. If you do not need to reduce the tipping radius, proceed to “Move the Refrigerator into House.”

Reduce Tipping Radius

(if required)

Before bringing the refrigerator into the home, be sure there is adequate ceiling height to stand the refrigerator upright. See “Tipping Radius” in the “Installation Requirements” section for more information.

If you do not have adequate ceiling height to stand the refrigerator upright, the tipping radius can be reduced by removing the top grille and side trims (see the following chart).

Model Reduced Tipping Radius

3688" (223.5 cm)

4288¹⁄₂" (224.8 cm)

2.Push the top grille straight up; then pull straight out. Lay the grille on a soft surface.

BAB

A. Top grille

B. Cabinet side trim

3.Remove the six screws attaching each cabinet side trim to the refrigerator and remove the side trims.

Move the Refrigerator into House

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

1.Place an appliance dolly under the left side of the refrigerator as shown. Place the corner posts from the packing materials over the trims and handles as appropriate to avoid damage. Slowly tighten the strap.

NOTE: Pass the dolly strap under the handles.

36" (91.4 cm) Models

1.Grasp both ends of the top grille.

W10379132A specifications

The KitchenAid W10379132A is a versatile kitchen appliance that enhances culinary experiences through a blend of functionality and innovative design. This attachment is primarily compatible with KitchenAid stand mixers, allowing users to maximize their mixer’s potential by embracing new culinary techniques.

One of the standout features of the W10379132A is its ability to mix, knead, and whip ingredients with ease. It includes a powerful motor and a robust construction that can handle a variety of doughs, from bread to cookie mixtures, ensuring consistent results every time. The motor is designed to minimize noise while providing ample power, so chefs can enjoy a more pleasant cooking experience without compromising on performance.

The attachment also boasts a range of innovative technologies that simplify food preparation. With its adjustable speed settings, users can precisely control the mixing process, allowing for both gentle folding and vigorous stirring, depending on the recipe requirements. This flexibility makes it suitable for both home cooks and professional chefs alike.

Durability is another essential characteristic of the KitchenAid W10379132A. Constructed from high-quality materials, the attachment is designed to withstand the rigors of frequent use. Its seamless design makes cleaning a breeze, as it can be easily detached and washed, either by hand or in a dishwasher, ensuring that hygiene is maintained effortlessly.

Additionally, the W10379132A is equipped with a user-friendly design that makes it easy for anyone to use. The ergonomic handle allows for comfortable handling, while the clearly marked attachments facilitate quick changes between mixing and other culinary tasks. This attention to user experience ensures that both novice cooks and seasoned chefs can achieve excellent results without frustration.

In summary, the KitchenAid W10379132A is more than just a mixer attachment; it is an essential tool for anyone looking to elevate their cooking. With its combination of power, durability, and ease of use, this attachment ensures that culinary creativity can thrive in any kitchen setting. Its myriad features and thoughtful design make it a valuable addition for creating a wide array of delicious dishes with confidence and efficiency.

KitchenAid W10379132A Installation Instructions, Unpack the Refrigerator, Reduce Tipping Radius

Models: W10379132A