Remember

■Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill the ice storage bin. Discard the first three batches of ice produced.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not store anything on top of the ice maker or in the ice storage bin.

Water Dispenser

(on some models)

IMPORTANT:

■After connecting the refrigerator to a water source or replacing the water filter, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) until a total of 4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTE: After 5 minutes of continuous dispensing, the dispenser will stop dispensing water to avoid flooding. To continue dispensing, press the dispenser button again.

■Allow 24 hours for the refrigerator to cool down and chill water. Dispense enough water every week to maintain a fresh supply.

Dispensing Water

1.Hold a container under the dispenser while pressing the button.

2.Release the button to stop dispensing.

Water Filtration System

The water filter is located in the upper right-hand corner of the refrigerator compartment.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Water Filter Status Lights

The water filter status lights will help you know when to change the water filter. When the Order light is on, it is almost time to change the water filter. When the Replace light is on, a new water filter should be installed.

After replacing the water filter, press and hold FILTER RESET for 3 seconds until the Order or Replace light turns off. See “Using the Controls.”

IMPORTANT: The disposable water filter should be replaced at least every 6 months. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter more often.

Replacing the Water Filter

To purchase a replacement water filter, see Accessories.

IMPORTANT: Air trapped in the water system may cause water and filter to eject. Always dispense water for at least 2 minutes before removing the filter or blue bypass cap.

1.Turn filter counterclockwise to remove.

2.Remove sealing label from replacement filter and insert the filter end into the filter head.

3.Turn the filter clockwise until it stops. Snap the filter cover closed.

4.Flush the water system. See “Water Dispenser” or “Water and Ice Dispenser.”

NOTE: The dispenser feature may be used without a water filter installed. Your water will not be filtered. If this option is chosen, replace the filter with the blue bypass cap.

12

Page 11 Page 13
Page 12
Image 12
KitchenAid W10635370A installation instructions Water Dispenser, Water Filtration System
Page 11 Page 13

W10635370A specifications

The KitchenAid W10635370A is a premium stand mixer accessory that serves as a versatile tool for both professional and home bakers alike. Designed to enhance the performance of the KitchenAid stand mixers, this attachment embodies the brand’s commitment to quality, durability, and functionality.

One of the main features of the W10635370A is its high-quality construction. Made from durable materials, it offers longevity and is resistant to wear and tear, ensuring it withstands the rigors of frequent use. The stainless-steel design not only provides a sleek, modern aesthetic but also guarantees easy cleaning and maintenance. Simply place it in the dishwasher for hassle-free sanitization.

This attachment is crafted to boost the mixing capabilities of KitchenAid stand mixers by providing a reliable and efficient mixing experience. The powerful motor compatibility ensures that it can handle a variety of ingredients, from dense doughs to delicate batters. The design allows for thorough mixing without leaving lumps, which is crucial for achieving the perfect texture in baked goods.

Another notable technology integrated into the KitchenAid W10635370A is its reliable locking mechanism. This feature ensures that the attachment stays securely in place during operation, allowing for a stable and consistent mixing performance. Furthermore, users will appreciate the ease with which the attachment can be mounted and dismounted, making switching between different tasks a breeze.

The W10635370A also excels in its versatility. It is compatible with a range of KitchenAid stand mixer models, which makes it an excellent investment for those who already own or plan to purchase a KitchenAid mixer. From kneading dough to whipping cream, this attachment helps streamline the cooking process, saving both time and effort.

In conclusion, the KitchenAid W10635370A is an essential kitchen accessory for those who value efficiency and quality in their cooking. Its robust construction, user-friendly design, and versatility make it an ideal choice for anyone looking to elevate their baking and cooking experience. Whether you are a seasoned chef or a novice home cook, this attachment is sure to meet your culinary needs and help you create delightful dishes with ease.
Top Page Image Contents