DN500
TechnicalSpecifications
|
| 1.5s |
| 1.5s | ||
1 | 20 |
| 1 | 1 | 20 | 1 |
C US
PUSH
2 | 1 | 1 | 2 |
| 3 |
| 3 |
|
|
| |
NEUTRIK |
| NEUTRIK |
|
PUSH
2 | 1 | 1 | 2 |
| 3 |
| 3 |
NEUTRIK |
| NEUTRIK |
|
Audio Inputs | Two |
Type | Electronically Balanced |
Impedance (ohms) |
|
Balanced | 20k |
Unbalanced | 10k |
Side Chain Inputs | Two Compressor + |
| Two Expander |
Type | Electronically Balanced |
Impedance (ohms) |
|
Balanced | 20k |
Unbalanced | 10k |
Audio Outputs | Two |
Type | Unbalanced |
Minimum Load Impedance | 600 ohms |
Source Impedance | <60 ohms |
Maximum Level | +21dBu |
Performance |
|
Frequency Response | +/- 0.5dB |
(20Hz 20kHz) |
|
Distortion (THD+N) | <0.03% @ 1kHz |
(@ +4dBu) |
|
Equivalent Input Noise | |
(20Hz 20kHz unweighted) |
|
Compressor |
|
Threshold | |
Ratio | 1:1 to 50:1 |
Knee | 1dB (hard) to 40dB (soft) |
Envelope | switchable auto (attack and release controls disabled) |
Attack (90% capture) | 0.05ms to 20ms |
Release (90% recovery) | 60ms to 2s |
Expander |
|
Threshold | |
Ratio | 1:1 to 25:1 |
Attack | switchable auto or fixed (2mS) |
Release (90% recovery) | 40ms to 2s |
Output Gain | |
Limiter/Clipper |
|
Threshold | 0dB to +20dB |
Power Requirements |
|
Voltage | 100 / 115 / 230 - 240V, 50/60Hz |
Consumption | <30VA |
Termination |
|
Audio Inputs / Outputs | |
Side Chain Inputs | normalled ¼ inch stereo jack |
Power |
25