KLH KC-80 owner manual Activating the alarm, Snooze function

2.While the display is flashing, use the SKIP buttons (I) to set the wake up hour and minute. In 12-hour mode, you must cycle through the first 12 hours in order to set a “PM” wake up time.

3.The WAKE button (L) changes the wake up sound. Choices are iPod, radio, or buzz. If radio or iPod is selected, the “Month—Day” display will change to flashing “V—NN”, where NN is a 2-digit number between 10 and 40. When this is flashing, the wake up volume NN can be set using the VOLUME +/- (J) buttons.

4.Repeat steps 2 through 4 to set the second alarm.

Activating the alarm

1.Press ALARM1 or ALARM2 once to turn on the respective alarm. The corresponding alarm icon will appear on the display.

2.Press the POWER button (A) or the SLEEP button (D) so that the unit will be in standby mode when wake up time arrives. The alarm WILL NOT FUNCTION if the unit is playing at wake up time.

3.If radio was selected for the wake-up sound, tune to the station that you wish to wake to before completing step 2.

4.Likewise, if iPod was selected as the wake up sound, be sure that your iPod is inserted in the dock before completing step 2.

5.To turn off the alarm, press ALARM1 OR ALARM2 and notice that the icon disappears from the display.

SNOOZE function

1.This function is only available after the unit has been activated by one of the alarms.

2.Press the SNOOZE/DIMMER button (M) to silence the unit for 10 minutes. You can repeatedly press the SNOOZE button for up to one hour after the initial wake up time.

3.Pressing POWER (A) will disable the snooze timer. ALARM1 or ALARM2

(O) can also be turned off to disable to snooze timer.