Using the radio

1.Press the POWER button (A) to turn the unit on. If the radio does not begin playing, press BAND/RADIO button (N) to activate the radio. When in radio mode, this button alternates between AM and FM bands.

2.Use the SKIP buttons (I) to tune the radio. There are two tuning modes. You can hold either SKIP button down until you reach a particular frequency. Or, you can press either SKIP button for 1 second and then release to have the radio automatically seek the next receivable station.

3.Radio reception is strongly influenced by antenna placement. Tune in your favorite AM or FM station and position the respective antenna for best reception.

4.If after optimizing the FM wire antenna placement, there is still too much noise, press the FM Mode button (F) to force the radio into mono mode lowering the noise.

Storing favorite stations for easy access

Note: This operation is only available from the remote control.

1.Tune to an AM or FM station that you wish to add to your favorites.

2.Press the PROG button (E) and within 5 seconds, press the PRESET button (C) 1 to 10 times to choose location 1 to 10 to store the station on, and, within 5 seconds press the PROGRAM button to store.

3.Repeat the above process to store up to 10 AM and 10 FM favorites.

Selecting stored stations

1.Turn the unit on. If necessary, press the BAND/RADIO button (F) to activate the radio and select the AM or FM band.

2.Repeatedly press the PRESET button (E) to step through the stored stations until the desired station is reached.

Alarm setting The KC-80 features two independent alarms for weekday and weekend, or husband and wife use.

1.Press and hold Alarm1 or Alarm2 (O) until the time display begins to flash. Notice that the icon for Alarm1 or Alarm2 will appear in the display window.

Page 12
Image 12
KLH KC-80 owner manual Using the radio, Storing favorite stations for easy access, Selecting stored stations