Klipsch manual RW-10d, RW-12d, RSW-10d, another user, Back Panel Features

Models: 12d

1 30
Download 30 pages 23.03 Kb
Page 4
Image 4
RW-10d, RW-12d, RSW-10d

RW-10d, RW-12d, RSW-10d

Management information. From this screen press the down or up cursor key to access other control settings.

“Phase” - This screen is used to adjust the subwoofer’s acoustic phase to match that of your main speakers. Use the Left/Right cursor keys to adjust the subwoofer’s phase from 0° to 180°. The proper setting of this control is highly dependant on room acoustics and the position of your subwoofer in the room. After setting the volume and lowpass controls set the phase to 0˚ and listen to a recording with a prominent, repeating bass line in your intended listening position. Repeat this process with the 180° setting and use the setting that yields the greatest amount of bass output. If neither of these settings is better than the other experiment with intermediate settings. From this screen press the down or up cursor key to access other control settings.

“Save Settings:” - This screen is used to store all of the above control settings in one of three memory presets (“Music”, “Movie” and “Night”). Use the Left/Right cursor keys to select the desired preset and press the Enter key to store your current control set- tings. “Settings Saved!” will be displayed. After the settings are stored in memory the display will return to the default “Volume” adjustment screen. From this screen press the up or down cursor key to access other control settings.

“Disp Brightness” - This screen is used to adjust the brightness level of the display screen. Use the Left/Right cursor keys to select from any one of 4 different brightness intensities. From this screen press the down or up cursor key to access other control settings.

“Power:” - This screen is used to select the “Auto On” or the “Always On” power mode for the Subwoofer’s amplifier. Use the Left/Right cursor keys to select between these two modes. When “Auto On” is selected, the subwoofer will automatically turn on when it senses a signal. It will automatically turn off after 20 minutes if no signal is present and “Standby” will be displayed. In the “Always On” setting the subwoofer will remain on as long as the main A/C power switch on the subwoofer’s rear panel is in the “ON” position. From this screen press the down or up cursor key to access other control settings.

“Keypad Lock” - This screen is used to lock the keypad and prevent your settings from being changed by other users. After making all desired adjustments press the Center key to lock the

keypad. “Keypad Locked Hold another user.and BACK PANEL FEATURES to unlock” will be displayed. The display will then return to the default “Volume” screen. To unlock the keypad press and hold the Left and Right keys until “Keypad Unlocked” is displayed. The display will again return to the default “Volume” screen. It is suggested that you write down all of your settings for future reference in case the keypad is unlocked and your settings are changed by

another user.

For more information on the controls mentioned in this manual and on the bass management settings of your electronics, see your authorized Klipsch dealer or visit www.klipsch.com.

BACK PANEL FEATURES

“POWER” ON/OFF - This is the main A/C power switch for the subwoofer. This switch must be in the “ON” position for the sub- woofer to operate and for the “AUTO/ON” feature to function. Set this switch to the “OFF” position if the subwoofer will not be used for an extended period of time (i.e. vacation).

IR SENSOR - An infrared remote control sensor is included on the rear panel of your subwoofer for integration with A/V remote control systems. The IR codes for this subwoofer can be obtained by visiting www.klipsch.com. A dedicated hand held remote control does not exist for these models.

CARE AND CLEANING OF YOUR POWERED SUBWOOFER Your subwoofer has a durable vinyl finish that should only require dry dusting or cleaning with a dry cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents. The brush attachment of your vacuum should remove any dust from your subwoofer enclosure.

WARRANTY — U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration if this product is sold or otherwise transferred to another party.

Page 4
Image 4
Klipsch manual RW-10d, RW-12d, RSW-10d, another user, Back Panel Features, Warranty — U.S. And Canada Only