Subwoofer Placement

Your Klipsch subwoofer is designed to operate at frequencies below 120Hz, which are essentially omnidirectional (difﬁcult to localize). There may be several options for placement of the subwoofer in your room that will effect its frequency response and output level. Corner placement improves the acoustic loading of the subwoofer, increasing its output and dynamic range capabilities. Placing the subwoofer away from walls or in the center of the room will result in the least amount of output. Asymmetrical placement of two subwoofers in a room may improve low frequency reproduction by providing a smoother and more consistent response pattern. Since even minor repositioning will result in an audible performance change due to room acoustics, Klipsch recommends experimentation with the subwoofer placement in the room.

A general rule of thumb is to place your subwoofer in the vicinity of the speakers with which it is being paired. For example, a subwoofer reproducing front channel bass will generally perform better when placed in the same end of the room as the main speakers. As well, a subwoofer connected to the rear channels of a surround system performs best when positioned in the rear of the room.

If the subwoofer is installed near your television and color distortion is noted, simply move the sub- woofer farther away from your television until the interference disappears.

If your subwoofer is placed in an enclosed cabinet, provisions must be made to ventilate the heat radiated by the enclosed ampliﬁer. Additionally, since some of the acoustic output is generated by the sub’s rear ﬁring port, a minimum of several inches of space should be provided around the sub- woofer. If the front of the cabinet is acoustically open, the back of the subwoofer, with the port and ampliﬁer controls, should be oriented in this direction.

If your subwoofer will be used on a hard, non-carpeted surface, attach the enclosed rubber pads to the subwoofer’s feet to prevent vibration and marring.

How to Connect Your

KSW Series Subwoofer

AC Power

Since your KSW subwoofer has an internal power ampliﬁer, it must be plugged into a nearby AC wall outlet. The subwoofer should be unplugged from the AC power with the power switch in the OFF posi- tion during hookup and installation. To eliminate a tripping hazard, all connections should be unplugged from the back panel of the subwoofer if it is being moved. Avoid extremely long extension cords of small gauge since they may impair the performance of the subwoofer ampliﬁer and present a potential ﬁre hazard. If the subwoofer will not be used for an extended period of time, unplug the power cord from the AC power outlet.

Note: 230 volt models are not supplied with an AC power cord, but are equipped with an IEC-type power cord socket.

!CAUTION: SINCE YOUR KLIPSCH SUBWOOFER HAS BUILT-IN ELECTRONICS, DO NOT PLACE IT NEAR SOURCES OF HEAT OR MOISTURE! TAKE CARE TO ROUTE THE POWER

CORD SO THAT IT WILL NOT BE CUT, DAMAGED OR PINCHED.

Types of Connections

Your subwoofer may be installed using either the SPEAKER LEVEL or LINE LEVEL connection, but not both. The LFE connection is an optional line level connection that can be used in conjunction with either type of hookup. Refer to the “LFE IN / BYPASS IN” and “BASS MANAGEMENT” sec- tions for more detail. You can connect the subwoofer so that your main speakers will reproduce a full range signal (all models) or a limited range (bass ﬁltered) signal (KSW 12 and KSW 15 only). Speaker level connections are used when connecting to a receiver or integrated ampliﬁer that lacks line level subwoofer or pre-amp output jacks. Line level connections are often the best choice when connecting the subwoofer to a system comprised of a separate pre-amp/processor and power ampliﬁer. This also applies to any receiver or integrated ampliﬁer that possesses main channel pre-amp or subwoofer outputs. The type of connection conﬁguration used depends upon the capabilities of your equipment and your performance goals.

20M0499 specifications

The Klipsch 20M0499 is an exceptional audio solution designed to deliver a robust listening experience across various environments. As part of Klipsch's esteemed line of products, this model showcases the brand's commitment to high-quality sound reproduction and innovative technologies.

One of the standout features of the Klipsch 20M0499 is its dynamic and detailed audio performance. Equipped with Klipsch's proprietary LTS (Linear Travel Suspension) tweeter, this device minimizes distortion and delivers crystal-clear highs, ensuring that vocal clarity and intricate details in music are perfectly preserved. The inclusion of an aluminum diaphragm also contributes to a lightweight yet durable construction, enhancing audio fidelity.

The dual 8-inch woofers in the Klipsch 20M0499 provide substantial bass output, making it an ideal choice for both music enthusiasts and home theater aficionados. These woofers are designed with a lightweight, rigid construction to improve response times and deliver deeper, more impactful low frequencies. The model’s ability to produce a rich soundstage allows for an immersive listening experience that brings movies and music to life.

Another significant characteristic of this model is the utilization of the Tractrix horn technology. This innovative design directs high frequencies more efficiently, creating a wider dispersion of sound throughout the listening area. As a result, it provides a more dynamic and engaging auditory experience, allowing for optimal sound quality regardless of positioning in the room.

The Klipsch 20M0499 also features an elegant and modern aesthetic that seamlessly blends with various décor styles. Its sleek cabinet design ensures that it not only sounds great but looks great too. Moreover, it comes equipped with high-quality connection options, allowing for easy integration with existing audio setups, whether wired or wireless.

Durability is another key aspect of the Klipsch 20M0499. Built with high-grade materials, it is designed to withstand the test of time while maintaining its structural integrity and performance levels. This commitment to quality ensures that users can rely on this model for years to come.

In summary, the Klipsch 20M0499 embodies advanced sound technologies coupled with a stylish and robust design. Its comprehensive feature set, including the LTS tweeter, Tractrix horn technology, and powerful woofers, makes it an outstanding choice for those seeking an elevated audio experience. Whether for casual listening or dedicated home theater use, the Klipsch 20M0499 is poised to exceed expectations.

Klipsch 20M0499 warranty Subwoofer Placement, How to Connect Your KSW Series Subwoofer

Models: 20M0499