RCA HDLP50W151 manual How to Connect TV + Speakers Without A/V Receiver

Connections & Setup

How to Connect: TV + Speakers Without A/V Receiver

You can connect two external speakers to the TV: one to the RIGHT terminal, and one to the LEFT terminal.

1.If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire core.

2.Open the lever on the speaker terminal.

3.Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).

4.Close the lever. Pull gently on the wire to see that it’s connected securely.

5.Set the SPEAKER SELECT switch:

•If you connect speakers and place the EXT/INT W/EXT SURR switch on the TV back panel in the INT W/ EXT SURR position, you get audio from the internal speakers as well as L minus R from both external speakers. This connection gives you a matrix surround effect.

•If you connect speakers and place the switch in the EXT position, you get audio from the external speakers only. The TV’s internal speakers are turned off.

6.Go to the Audio menu and Fixed/Variable Out screen and make sure Variable Out - Speakers On is selected.

Notes:

When connecting the speaker wire, make sure you connect the positive

(+) terminal on the TV to the positive (+) terminal on the speaker. One

Speaker wireside of the speaker wire is usually marked with a white stripe to help you match the terminals correctly. If the (+) and (-) terminals are not matched properly, the speakers will not be “in phase,” causing reduction in bass frequencies.

RIGHT	LEFT	FIXED/VARIABLE
		AUDIO
		OUTPUT
	SPEAKER
	SELECT
		INT W/ R
	EXT	EXT
		SURR

EXTERNAL SPEAKERS L

Do not allow the wire core to touch other wires or terminals. Damage to components could result if the cores of two wires touch.

Arrange the speakers in your TV room to achieve maximum sound quality.

The external speaker rating is 8 ohms with 30 watts total power handling capabilities.

RIGHT	LEFT	FIXED/VARIABLE				TV
		AUDIO
		OUTPUT	CENTER CHANNEL INPUT
	SPEAKER		MAXIMUM AMPLIFIER POWER RATING
			INTERNAL	(60 WATTS into 8 OHMS)
	SELECT		SPEAKER
		INT W/ R	SOURCE
	EXT	EXT	TV EXT AMP
		SURR
EXTERNAL SPEAKERS		L
VIDEO		VIDEO	VIDEO	VIDEO
INPUT 1		INPUT 2	INPUT 3	INPUT 4
V	V	V	PR	V	PR	VIDEO
						INPUT 5

		S-VIDEO	S-VIDEO					DVI-HDTV
	L/MONO	L/MONO	L/MONO	PB	L/MONO	PB	L/MONO
–	+
	R	R	R	Y	R	Y	R
	AUDIO	AUDIO	AUDIO		AUDIO		AUDIO
	INPUT 1	INPUT 2	INPUT 3		INPUT 4		INPUT 5

RECORD

OUTPUT

VIDEO

ANTENNA B	ANTENNA A
INPUT	INPUT

AUDIO

	DIGITAL
	AUDIO	ETHERNET
R	OUTPUT
L		G-LINK

Back of Right Speaker

–+

Back of Left Speaker

14 Chapter 1