TROUBLESHOOTING
SB 120 will not Power On
•Is it plugged into a live outlet?
•Is the rear power switch on?
No sound
•Is it plugged into a live outlet and the rear power switch is on?
•Are all cables from the TV/Cable Box/Satellite Box plugged in tightly?
•If the optical cable is being used were the clear plastic caps from both ends removed before connecting?
•Is the volume turned up?
•Is standby off (no SOLID RED status light)?
•Is the source input correct?
•Turn off the rear power switch, then back on.
TV/Cable/Satellite Box Remote will not program
•Carefully follow all remote programming instructions.
•Carefully go through the remote programming again, but use the original remote that comes with the TV. You DO NOT need to then reprogram using your cable/satellite/universal remote control.
•Program the original TV remote to the SB 120 (if original is a different one), then use the universal remote without programming it.
•You may need to repeat programming of a function in some cases.
•There may be some cases the SB 120 is unable to learn certain remote codes.
Bluetooth does not work
•Is the device paired to the SB 120?
•Move your device closer to the SB 120 and make sure it is paired.
•If the status light blinks RED while attempting to pair, start the pairing process over.
Manufactured under license from Dolby Laboratories. Dolby and the
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Klipsch Group, Inc. is under license.
