SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Weight | 13 lbs. ea. |
Dimensions | 8.5" H x 7.250" W x 14.0" D |
Circuit type | Single ended Class A Triode |
Power output | 2.3 watts RMS into 4 ohms |
| 5 watts RMS into 8 ohms when bridged |
| NOTE: Power increases as ohms decrease |
| Stable into 1 ohm speaker loads |
Input voltage | 2.0 volts for full output |
Noise / Hum | Less than 1.5 millivolts (amazing for tube gear) |
Response | 20 Hz ~ 20 kHz |
Feedback | ZERO negative feedback used |
Rectification | 5U4G tube rectification |
Output tubes | SV83, |
Signal tube | 6N1P or 6922 or 6Dj8 |
Transformers | All transformers are custom made for this amplifier by Decware |
Biasing | |
Resistors | All resistors are precision WW/MF by DALE, VISHAY |
Signal Cap | Film and Foil |
Filter Caps | All filter caps are US made SPRAGUE/ATOM |
AC cord | Fused IEC connector provided with removable power cord |
Consumption | 65 watts at full power |
Input jacks | RCA type 24K Gold / Teflon |
Output jacks | Gold |
Speaker dB/1w | 89 dB minimum / 96 dB is ideal |
Warranty | Lifetime to original owner / 90 days on tubes |