Onkyo DR-S2.2 instruction manual Specifications

Specifications

AMPLIFIER SECTION

Power Output (FTC)	All channels 40 watts per channel min.					LINE (VIDEO 1, VIDEO 2/CDR/PC, TV/LINE, TAPE/MD/HD)
	RMS. into 6 ohms two channel driven,								200 mV/50 kohms
	1,000 Hz with no more than 5 % total					Composite (VIDEO 1, VIDEO 2/CDR/PC) 1 Vp-p, 75 ohms
	harmonic distortion.					S-VIDEO (VIDEO 1, VIDEO 2/CDR/PC) Y: 1 Vp-p, 75 ohms
Continuous power output (DIN)									C: 0.28 Vp-p, 75 ohms
	All channels 30 watts per channel min.					Output Level and Impedance
	RMS. into 6 ohms two channel driven,					DIGITAL OUTPUT (OPT)			–21 to –15 dBm
	1,000 Hz					REC OUT (TAPE/MD/HD, VIDEO 2/CDR/PC)			200 mV, 2.2 kohms
Continuous Power output (EIAJ)						PRE OUT (SUBWOOFER)			1 V, 470 ohms
	All channel 45 watts per channel min.					Composite (MON OUT, VIDEO 1)			1 Vp-p, 75 ohms
	RMS. into 6 ohms two channel driven,					S-VIDEO (MON OUT, VIDEO 1)			Y: 1 Vp-p, 75 ohms
	1,000 Hz								C: 0.28 Vp-p, 75 ohms
Dynamic Power	6 ohms: 42 W (L/R)					COMPONENT VIDEO OUTPUT			Y: 1.0 Vp-p, 75 ohms
	8 ohms: 35 W (L/R)					(Except European model)			PB/PR: 0.7 Vp-p, 75 ohms
Total Harmonic Distortion	5 % at rated power					RGB (European model)			0.7 Vp-p, 75 ohms
	0.2 % at 1 watt output					Frequency Response		20 to 30,000 Hz : +/– 0.8 dB
IM Distortion	5 % at rated power					Acoustic Control		1: +9 dB at 120 Hz
	0.2 % at 1 watt output							2: +9 dB at 120 Hz
Damping Factor	40 at 8 ohms							+6 dB at 10,000 Hz
Input Sensitivity and Impedance						Signal-to-noise Ratio		100 dB (0.5 V INPUT LINE)
VIDEO 1 DIGITAL INPUT (OPT)		–21 to –15 dBm				Muting		–50 dB
VIDEO 2 DIGITAL INPUT (COAX)		0.5 Vp-p, 75 ohms
DVD SECTION
Signal readout system	Optical non-contact					Laser		Semiconductor laser, wavelength 650 nm
Linear velocity	3.49 m/s (Single Layer)					Frequency response		10 Hz to 44 kHz (96 kHz)
	3.84 m/s (Dual Layer)					Signal-to-noise ratio (digital audio)			More than 100 dB
Error correction system	Reed Solomon Product Code					Audio dynamic range (digital audio)			More than 93 dB
Signal system	North American model: NTSC					Harmonic distortion (digital audio)			Less than 0.025%
	Other models: PAL/Auto					Wow and flutter		Below threshold of measurability
Regional restriction code USA and Canadian area: 1						Operating conditions		Temperature: 5°C to 35°C (41°F to 95°F),
	European area: 2							Operation status: Horizontal
	South-east Asian area: 3
	Australian and South American area: 4
	PRC: 6
TUNER SECTION
Tuning Range		FM:	87.50 to 108.00 MHz (50 kHz steps)
		AM: (North American and South American models)					(Other models)
			530 to 1710 kHz (10 kHz steps)				522 to 1611 kHz (9 kHz steps)
Usable Sensitivity		FM: Mono		11.2 dBf,	1.0 µV (75 ohms IHF)
					0.9 µV (75 ohms DIN)
			Stereo	17.2 dBf,	2.0 µV (75 ohms IHF)
					23 µV (75 ohms DIN)
		AM:	30 µV
50 dB Quieting Sensitivity		FM: Mono		17.2 dBf,	2.0 µV (75 ohms)
			Stereo	37.2 dBf,	20.0 µV (75 ohms)
Capture Ratio		FM:	2.0 dB
Image Rejection Ratio		FM: (North American and South American models)					(Other models)
			40 dB				85 dB
		AM:	40 dB
IF Rejection Ratio		FM:	90 dB			Harmonic Distortion		FM: Mono	0.2 %
								Stereo	0.3 %
		AM:	40 dB
								AM:	0.7 %
Signal-to-noise Ratio		FM: Mono		73 dB, IHF
						Frequency response		FM: 30 to 15,000 Hz (+/– 1.0 dB)
			Stereo	67 dB, IHF
						Stereo Separation		FM: 45 dB at 1,000 Hz
		AM:	40 dB
								30 dB at 100 to 10,000 Hz
Alternate Channel Att. (+/– 400 kHz)		FM: Mono		55 dB, IHF
						Stereo Threshold		FM: 17.2 dBf,	20 µV (75 ohms)
Selectivity		FM:	50 dB, DIN 55dB, IHF
AM Suppression Ratio		FM:	50 dB
GENERAL
Power Supply Rating	(North American and South American models)					Dimensions (W x H x D)		435 ⋅ 101 ⋅ 428 mm (171/8 ⋅ 4 ⋅ 1613/16 ins.)
and Power Consumption	AC 120 V, 60Hz		2.0 A			Weight		8.8 kg (19.4 lb.)
	(Other models)
	AC 120V, 60Hz		170 W

AC 230-240 V, 50Hz 170 W

Specifications and features are subject to change without notice.

87