Onkyo DR-S2.2 instruction manual Customizing the Function Settings, Using the Setup Screen Menus

Customizing the Function Settings

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

1	Press ON (STANDBY/ON on the
	front panel).
2	Press SETUP.
	The Setup screen appears.
	Example (North American model)
	Video1 V2 Language	General
	TV Screen — 4:3(Letter Box)
	Component Video — Interlace
	Setup Video
	Adjust video format/quality
3	Move	SETUP Exit
	Use the cursor buttons (2/3) to
	select the menu you want.
	As each menu is selected with the cursor,
	the settings appear below the menu
	heading.
4	Use the cursor buttons (∞) to enter
	the menu.
	The top item within the menu becomes
	highlighted.
	Example (North American model)
	Video1 V2 Language	General
	TV Screen	4:3(Letter Box)
	Component Video	4:3(Pan&Scan)
		16:9(Wide)
	Select your display preference
	Move	ENTER Select SETUP Exit
5	Use the cursor buttons (5/∞) to
	select the setting you want to

change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

6	Use the cursor buttons (3) to enter
	the setting options.

Example (North American model)

Video1 V2 Language	General
TV Screen — 16:9(Wide)
Component Video	Interlace
	Progressive
	Auto Progressive
Select Interlace or Progressive
output Component Video
Move	ENTER	Select	SETUP	Exit

•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.

•Operating the menu after pressing 7 may cancel the resume function.

•Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

7	Use the cursor buttons (5/∞) to
	select a new setting and press
	ENTER to set the new setting in
	memory.
	Press RETURN or the cursor button (2) to
	exit the options without making any
	changes.
8	Press RETURN or the cursor button
	(2) to go back to the main menu bar
	to select another menu.
9	Press SETUP to close the Setup
	screen.

The Setup screen closes.

Notes

•If you turn off the DVD Receiver during setup, the settings are canceled. Press SETUP to finish the setup.

•The memorized resume position may be erased by setup.

•The Setup screen always shows the latest settings.

64