Onkyo DR-S2.2 instruction manual Using Speaker Mounts/Brackets, Using the Optional Speaker Stands

HTP-240.fm Page 7 Wednesday, December 3, 2003 9:30 AM

Various Mounting Methods—Continued

■Mounting horizontally

To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall.

Center speaker

	Keyhole slots for horizontal
Spacers	wall mounting	Spacers
		2-9/16"
		2-9/16"
4-7/8"	7-9/16"	4-7/8"

Caution:

A mounting screw’s ability to support a speaker depends on how well it’s anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 3/8 inch or less and a shank diameter of 1/8 inch (or 4 mm) or less (No. 8 or smaller). With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes.

(We recommend that you consult a home installation professional.)

Using Speaker Mounts/Brackets

Threaded inserts for 1/4-inch machine screws are pro- vided on the rear of each speaker for wall-mounting with commercially available speaker mounts and brackets. Refer to the manual supplied with your mounts or brack- ets for installation details.

Use this hole if mounting vertically

Use this hole if mounting horizontally

Note:

The portion of the screw that goes into the speaker’s threaded insert should be between 1/5 and 3/8 of an inch long.

Mount or bracket

Using the Optional Speaker Stands

Optional Onkyo speaker stands (AS-240) are available for the front left and right and surround left and right speakers. To attach a speaker to a stand, align the mount- ing holes in the stand with those on the speaker’s rear panel, and secure by using four of the supplied fixing screws.

1/4"

1/5"–3/8"

7