Onkyo DR-S2.2 Front Speaker Bases Wall Mounting, Center Speaker Base, Mounting vertically

HTP-240.fm Page 6 Wednesday, December 3, 2003 9:30 AM

Various Mounting Methods

Front Speaker Bases Wall Mounting

If you intend to stand the front speakers on the floor or on a TV stand or AV stand, you should attach the sup- plied front speaker bases. To do this, align the mounting holes in the base with base/stand inserts on the front speaker’s rear panel, and secure by using four of the sup- plied fixing screws.

Base/stand inserts

Mounting holes

Center Speaker Base

The center speaker base is for mounting the center speaker horizontally. If you put it on a TV stand or AV stand, aim it toward the listening position. The center speaker should sit securely on the base. If it’s loose, try resetting it.

Note:

•If you put the center speaker on the floor, take it off the base and position it so that it’s facing slightly up toward the listener’s ears.

The front speakers, center speaker, surround speakers, and surround back speaker (SKS-HT240 only) can eas- ily be wall mounted by using the keyhole slots. To pre- vent the speaker from vibrating against the wall, attach four of the supplied spacers to the keyhole fins on the rear of each speaker.

■Mounting vertically

To mount the front speakers, surround speakers, or sur- round back speaker (SKS-HT240 only) vertically, use the keyhole slot shown to hang each speaker on a screw that’s securely screwed into the wall.

Front speaker

2-9/16" 2-9/16"

4-7/8"

Keyhole slot for vertical wall mounting

Spacers

Spacers

Bottom

Surround/Surround Back speaker

2-9/16" 2-9/16"

1-13/16"	Keyhole slot for
	vertical wall
	mounting

Spacers

Base for horizontal

mounting

6

Spacers

Bottom