Onkyo DR-S2.2 Press Distance, Press UP/DOWN 5/ ∞ to select, Front left and right speaker

Speaker Setup

Setting the Distance From the Listening Position to Each Speaker

Before starting the procedure below, measure the distances from each speaker to the listening position.

For pair speakers such as front left and right speakers, the distance from the listening position to one speaker should be the same as the distance to the other.

In the procedure below, select the values which approximate the actual distances.

DISTANCE

UP/DOWN 5/∞

1	Press DISTANCE.
Remote controller	The distance entry display for the front left
	and right speakers appears.
only

2	Press UP/DOWN 5/∞ to select the
	front left and right speaker
	distance.

	You can select a distance between 0.3 m
	and 9 m (1 ft. and 30 ft.).
3	Press DISTANCE, then press
	UP/DOWN 5/∞ repeatedly to select
	the center speaker distance.

«

You cannot enter the following distances:

• Distances longer than the distance set for the front speakers.

•Distances shorter than the distance obtained by subtracting “1.5 m (5 ft.)” from the distance entered for the front speakers.

Note

If you selected a speaker configuration with no center speaker on the previous page, this step will be skipped.

4	Press DISTANCE, then press
	UP/DOWN 5/∞ repeatedly to select
	the surround left and right speaker
	distance.

«

You cannot enter the following distances:

•Distances longer than the distance set for the front speakers.

•Distances shorter than the distance obtained by subtracting “4.5 m (15 ft.)” from the distance entered for the front speakers.

Note

If you selected a speaker configuration with no

surround speakers on the previous page, this

	step will be skipped.
5	Press DISTANCE.
	The normal display resumes.

32