Onkyo DR-S2.2 instruction manual Erasing the programmed command from one button

Erasing the programmed command from one button

You can only erase memorized commands and not preset ones.

1	Press and hold down the desired
	MODE button for the command,
	press the ENTER button, and then
	release both buttons.
	When you press the MODE button, the
	SEND/LEARN indicator lights. When you
	press the ENTER button, the lamp turns
	off. When you release the buttons, the
	lamp lights again.
2	Press and release the button for the
	command you wish to erase.
	When you press the button, the SEND/
	LEARN indicator turns off. When you
	release the button, the lamp lights again.
3	Press and release the same button
	again.

The SEND/LEARN indicator flashes twice slowly. The memorized command is erased.

Note

If no button is pressed for more than 30 seconds during the erasing procedure, the SEND/LEARN indicator flashes three times quickly, and the remote controller exits the erasing mode. Resume from Step 1.

SEND/LEARN indicator

MODE buttons

ENTER

Erasing all the commands programmed under a MODE button

1	Press and hold down the desired
	MODE button, press the ENTER

button twice, and then release both buttons.

When you press the MODE button, the SEND/LEARN indicator lights. When you press the ENTER button, the lamp turns off. When you release the buttons, the lamp flashes twice slowly and then lights again.

2	Press and release the same MODE
	button again.
	When you release the button, the SEND/
	LEARN indicator flashes twice slowly. This
	erases all the commands memorized to the
	MODE button.

Notes

•If no button is pressed for more than 30 seconds during the erasing procedure, the SEND/LEARN indicator flashes three times quickly and the remote controller exits the erasing mode. Resume from Step 1.

•If you perform an invalid operation during erasing, the SEND/ LEARN indicator flashes three times quickly, and the remote controller exits the erasing mode. Resume from Step 1.

•If many commands have been programmed to the MODE button, then the SEND/LEARN indicator may remain lit for up to 20 seconds during Step 2. This is not a malfunction.

83