Onkyo DR-S2.2 Recording Using the Connected Equipment, Basic Recording Procedure

Recording Using the Connected Equipment

You can record according to the following using the connected recording equipment:

•Sound/picture of discs played back by the DVD Receiver,

•Sound of FM/AM programs, and

•Sound/picture of the connected source.

Note

Many discs and sources are copy protected. Copy protected sources are impossible to record.

Basic Recording Procedure

1	Set the recording equipment (MD
	recorder, DAT, Cassette tape deck,
	VCR, DVD recorder, CD recorder,
	etc.) to recording pause.
2	Select the input source to be
	recorded, then set it to play pause.
	• To play and pause a DVD video, Video
	CD, or audio CD, see page 34.
	• To select an FM/AM program, see page
	38.
	• To select a connected source, see page
	40.
	Refer to the manuals of the connected
	source equipment for instructions on how
	to play and pause.
3	Release the recording pause set in
	step 1 to start recording.
4	Start playback of the selected
	source in step 2.

Notes

•If you select another input source during recording, the selected source will be recorded.

•Sound effects described on pages 44 to 50 do not affect the recorded sounds.

■Recording the Picture and Sound From Different Sources at the Same Time

The picture from the playing VIDEO 2/CDR/PC source is output through the VIDEO OUT jacks when you select any audio source (TAPE/MD, FM, or AM) or TV/LINE.

Play the VIDEO 1 source and select TAPE/MD, FM, AM, or TV/LINE, then you can record the picture from the VIDEO 1 source and the sound from the selected input source at the same time, using the recording equipment connected to the VIDEO 2 jacks.

■Digital recording from the source connected to the digital input connectors to the digital recording equipment connected to the digital output connector

The digital input connectors are as follows:

•The VIDEO 1 DIGITAL INPUT (COAX) connector, and

•The VIDEO 2 DIGITAL INPUT (OPT) connector.

The digital output connector is the DIGITAL OUTPUT (OPT) connector.

Recording digital sound signals from sources connected to the digital input connectors using digital recording equipment connected to the digital output is possible unless:

•The recording is against SCMS (Serial Copy Management System) rules (for details of SCMS rules, refer to the manual of the digital recording equipment),

•The digital signals are in bitstream format (the recordable digital signal format is PCM –– two channel digital stereo sound signals), or

•The sampling frequency is out of the recordable range of the recording equipment (for recordable sampling frequency, refer to the manual of the digital recording equipment). Note that the maximum signal frequency output from the DVD Receiver is 48 kHz.

■Analog recording from a DVD Video played

using the DVD Receiver DVD

The digital sound signals are converted to analog signals and output to the analog output jacks unless the DVD video is recorded in the DTS Surround.

Although the speakers can reproduce DTS Surround sounds, DTS signals are not output to the analog output jacks.

77