Onkyo DR-S2.2 instruction manual Programming Video CDs, CDs, To save a program in memory

Notes

•When programming chapters, chapters not programmed may appear on the screen. This is not a malfunction.

•Programming may not be possible with certain DVDs. On these

types of discs, the mark will appear on the screen when programming is attempted.

•Only chapters within the same title can be programmed during chapter programming.

■To save a program in memory

This DVD Receiver can memorize the programs on up to 24 DVDs. By turning the [Program Memory] to [On], the DVD Receiver will save your program and recall it the next time you use the same DVD. When the program memory exceeds 24, programs will be erased in chronological order from the oldest program in memory.

1Use the cursor button (∞) to highlight [Program Memory] and use the cursor button (3) to select [On].

Program Chapter Program Title

Current:	Title		7 Chapter 1
Title	1		(Chapter 1~18)
Program Memory		On
		Off
	Move	ENTER	Select PROGRAM Exit

2Press ENTER.

The program is saved in memory.

Note

When a DVD with a program stored in memory is loaded, program playback may start automatically.

■To erase a program saved in memory

The player erases programs in chronological order when the maximum number of programs that can be held in memory is exceeded. To prevent the player from erasing older programs that you may still use regularly, or when you don’t want to use a program anymore, it is possible to manually erase programs stored in memory.

1Load a DVD that has a program stored in memory.

2Press PROGRAM.

The program screen appears.

3Use the cursor button (∞) to highlight [Program Memory] and use the cursor buttons (3/∞) to select [Off].

4Press ENTER.

The program is cleared from memory.

2/3/5/∞

ENTER

Before operating the remote controller

Press MODE DVD. £

7

PROGRAM	CLEAR
Number
buttons

VCD CD

Programming Video CDs, CDs

A program with a maximum of 24 steps can be memorized.

1 Press PROGRAM.

The program screen appears. When a Video CD or CD is loaded, the cursor appears in the program window.

Program Track

Current:		Track	1(/10)
	Total Time		0.00

Move ENTER Play PROGRAM Exit

2	Use the number buttons to enter the
	numbers of the tracks in the order
	you want to program them in.
	• To program tracks 9, 7, and 18 in order,
	press 9, 7, +10 and 8.
	• To edit the program, refer to the
	procedures on the previous page.

•To program a pause in a program, press 8 instead of a number button.

“8” appears on the screen and the pause can be programmed.

A pause cannot be programmed as the first or last position in a program, and two or more pauses cannot be programmed in succession.

3	Press ENTER or £.
	• Playback starts in the specified track
	order.
	• Press PROGRAM to return to the
	previous display. The program play will
	not begin until £ is pressed.
	• To stop the program play, press 7.

Notes

•To program a pause, or to add or delete a number, refer to the procedures for “Programming DVDs” on page 56.

•You cannot program when playing a Video CD using menu selections (during PBC).

57