Onkyo DR-S2.2 Adjusting Each Speakers Relative Volume Balance Test Tone, Press Test Tone

Adjusting Each Speaker's Relative Volume Balance – Test Tone

Adjust each speaker’s relative volume balance so that the volumes of all speakers’ test tones sound equal at the listening position.

CH SEL

TEST TONE

UP/DOWN 5/∞

1	Press TEST TONE.
Remote controller	Each speaker emits the test tone (pink
	noise) and the display shows the speaker
only
	emitting the test tone in the following
	order:
	Left	→	Center
	(Front left ch.)		(Center ch.)
	↑		↓
	Subwfr		Right
	(Subwoofer)		(Front right ch.)
	↑		↓
	Surr L	←	Surr R
	(Surround left ch.)		(Surround right ch.)

Note

No test tone will be emitted from the speaker which is not included in the speaker configuration on pages 29-31 even if it is actually connected.

2	Press CH SEL repeatedly to select
	the speaker, then press UP/DOWN
	5/∞ to adjust the volume level.
«	The volume level can be adjusted between
	–12dB and +12dB.

3

When you have completed the adjustment by repeating step 2, press TEST TONE.

The test tone stops and the normal display resumes.

Note

Even if you don’t press TEST TONE, the test

tone will stop after two minutes.

33