Onkyo DR-S2.2 Various Functions While Playing the Connected Source, About digital sound

Playing the Connected Source INPUT SELECTOR 2/3

This section shows you how to play the sources connected to the DVD Receiver.

You may need to see “Connecting to a TV” on pages 16, 17 and “Connecting to Audio/ Video Equipment” on pages 21 and 22 while following the steps in this section.

INPUT 5/∞

1 controllerRemote

Unit

Press INPUT SELECTOR 2/3 on the remote controller or INPUT 5/∞ on the unit to select one of the following input sources:

•VIDEO 1

•VIDEO 2/CDR/PC

•TV/LINE

•TAPE/MD/HD

The selected input source appears in the multipurpose display. Also the input source indicator is lit in the display until the DVD Receiver is switched to another input source.

e.g. When VIDEO 1 is selected.

About digital sound

If the equipment is digitally connected to the DVD Receiver, the sound from the digital input will automatically be selected and reproduced instead of the analog sound as explained below.

•When the VIDEO 1 source is selected, the digital sound from the DIGITAL INPUT VIDEO 1 COAX jack is reproduced.

•When the VIDEO 2 source is selected, the digital sound from the DIGITAL INPUT VIDEO 2 OPT jack is reproduced.

When the digital sound is reproduced, the DIGITAL indicator lights up in the display. According to the received sound system, the ŸDIGITAL or DTS indicator lights up.

ŸDIGITAL DTS DIGITAL

Note

The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and PCM sound formats from connected equipment.

2 Start playing the selected source.

Enjoying the picture with the sound of another source

Play the VIDEO 2 source and select TV/LINE, TAPE/MD/HD, FM or AM. Then you can enjoy the VIDEO 2 picture and the sound from the selected input source at the same time.

Various Functions While Playing the Connected Source

To use the following functions, see page 42.

•Turning on/off the SPEAKERS A/SPEAKERS B Systems (North American and South American models only)

•Adjusting the Volume

•Muting the Sound

•Listening Through Headphones

•Controlling the Brightness of the display on the DVD Receiver

•Using the Sleep Timer

Enjoying the Sound Effects While Playing the Connected Source

See page 44.

40