Klipsch SF-2 warranty Component Specifications, SB-2, SB-3, SF-1, SP-1, SC-1, SS-1

Component Specifications

SB-2

Sensitivity: 93dB @ 1 watt / 1 meter

Bandwidth: 54Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2400Hz

Power Handling: 85 watts maximum continuous (340 watts peak)

Enclosure Type: Bass reflex via wide flare, rear-firing port

Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn and one 6.5" (16.51cm) K-1092-SB magnetically shielded woofer featuring a polymer housing and IMG cone

Net Weight: 13 lbs. (5.9kg)

Height: 15" (38.1cm)

Width: 7.3" (18.5cm)

Depth: 9.75" (24.7cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Woodgrain vinyl veneer

SB-3

Sensitivity: 94dB @ 1 watt / 1 meter

Bandwidth: 52Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2700Hz

Power Handling: 100 watts maximum continuous (400 watts peak)

Enclosure Type: Bass reflex via wide flare, rear-firing port

Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn and one 8" (20.3cm) K-1093-SB magnetically shielded woofer featuring a polymer housing and IMG cone

Net Weight: 18 lbs. (8.18kg)

Height: 17" (43.18cm)

Width: 8.69" (22.06cm)

Depth: 11.25" (28.57cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Woodgrain vinyl veneer

SF-1

Sensitivity: 94dB @ 1 watt / 1 meter

Bandwidth: 40Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2kHz

Power Handling: 100 watts maximum continuous (400 watts peak)

Enclosure Type: Bass reflex via wide flare, rear-firing port

Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn and one 6.5" (16.51cm) K-1075-SB magnetically shielded woofer featuring a polymer housing and IMG cone

Net Weight: 33 lbs. (15kg)

Height: 33" (83.82cm)

Width: 8" (20.32cm)

Depth: 13.6" (34.54cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Woodgrain vinyl veneer

SF-2

Sensitivity: 96dB @ 1 watt / 1 meter

Bandwidth: 35Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2.8kHz

Power Handling: 100 watts maximum continuous (400 watts peak)

Enclosure Type: Bass reflex via wide flare, rear-firing port

Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn and two 6.5" (16.51cm) K-1078-SB magnetically shielded woofers featuring a polymer housings and IMG cones

Net Weight: 38 lbs. (17.3kg)

Height: 35" (88.9cm)

Width: 8" (20.32cm)

Depth: 13.6" (34.54cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Woodgrain vinyl veneer

SP-1

Sensitivity: 94dB @ 1 watt / 1 meter

Bandwidth: 30Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequencies: 2.3kHz and 125Hz

Power Handling: 100 watts maximum continuous

(400 watts peak)

Enclosure Type, Tweeter and Mid Bass: Sealed

Enclosure Type, Subwoofer: Bass reflex via wide flare, rear-firing port

Drive Components: Three-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn, one 5.25"

(13.33cm) K-1076-SV magnetically shielded mid-bass woofer featuring a polymer housing and IMG cone and one 8"(20.32cm) K-1077-SB magnetically shielded woofer featuring a polymer housing

Subwoofer Amplifier: Class A/B MOSFET–225 watts FTC-rated power: 55 watts, 4 ohms, 22-125Hz @ 1% THD maximum

Auto Power: 2 second ON delay, 15 minute OFF delay

Inputs: High level speaker terminals via five-way binding posts, 1) Line level dedicated LFE input via RCA phono jack (non-filtered)

Outputs: 1) Line level LFE output via RCA phono jacks (pass through from LFE input)

Net Weight: 47 lbs. (21.36kg)

Height: 37" (93.98cm)

Width: 9" (22.86cm)

Depth: 14" (35.56cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Woodgrain vinyl veneer

Voltage: 110/120VAC 60Hz

Export version: 230VAC 50/60Hz

SC-1

Sensitivity: 95dB @ 1 watt / 1 meter

Bandwidth: 60Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2.2kHz

Power Handling: 100 watts maximum continuous (400 watts peak)

Enclosure Type: Sealed

Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion driver with a 90° x 60° Tractrix Horn and two 5.25" (13.3cm) K-1079-SV magnetically shielded woofers featuring polymer housings and IMG cones

Net Weight: 15 lbs. (6.78kg)

Height: 6.5" (16.5cm)

Width: 18" (45.72cm)

Depth: 7.5" (19.1cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Black matte vinyl

SS-1

Sensitivity: 94dB @ 1 watt / 1 meter (equivalent sound energy)

Bandwidth: 60Hz–20kHz±3dB

Nominal Impedance: 8 ohms

Crossover Frequency: 2kHz

Power Handling: 100 watts maximum continuous (400 watts peak)

Enclosure Type: Sealed

Drive Components: Two-way system using two 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compres- sion drivers with 90° x 60° Tractrix Horns and one 5.25" (13.3cm) K-1076-S woofer featuring a polymer housing and IMG cone

Net Weight: 8.5 lbs. (3.9kg)

Height: 6.75" (17.15cm)

Width: 15" (38.1cm)

Depth: 6" (15.24cm)

Cabinet: Medium density fiber board construction (MDF)

Finish: Black or white

CE

This product complies with the essential requirements of EMC direc- tives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly.