Knoll warranty Warranty, Features, KES400 KES600, Eco-SystemPower Amplifiers

KES400 and KES600 Eco-System™Amplifier specifications:

Inputs:	8 or 12 gold RCA jacks with adjustable gain
Input impedance:	50k ohms
Outputs:	5 way gold binding posts
Output power:	50 watts RMS per channel (8 ohms)
Peak output power:	100 watts per channel (8 ohms)
Ideal impedance:	4 – 8 ohms
Frequency response:	10 Hz – 40 kHz +/- 1dB (1w)
S/N ratio:	Over 105 dB A weighted (50 watts)
THD distortion:	Less than 0.1% 20 Hz to 20 kHz
IMD distortion:	Less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE)
Dimensions:	17” x 3.5” x 11.5” (432 x 89 x 292 mm)
Fan noise:	Quiet 28 dBA
Power:	Standby in Eco-System™ less than 5 watts
	Maximum 750 watts at 117 VAC or 230VAC
Weight:	KES400 20 lbs (9 kg); KES600 22 lbs (10 kg)
Construction:	Steel chassis, powder coated; glass epoxy
	printed circuit boards

Warranty

Knoll Systems warrants its products sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship. This warranty extends for three full years from the date of purchase by the original consumer. Any products returned to Knoll Systems and found to be defective by Knoll Systems within the warranty period will be repaired or replaced at Knoll Systems option, at no charge. Knoll Systems will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

Knoll Systems www.knollsystems.com

145 Tyee Drive Point Roberts, WA 98281

12140 Horseshoe Way Richmond BC V7A 4V5 tel (604) 272 4555, fax (604) 272 5595

KES400 and KES600 Made in Canada, 2011, Knoll Systems All Rights Reserved

KES400 KES600

Eco-System Power

Amplifiers

Installation Instructions v1.3

Warning: To be installed and/or used in accordance with appropriate electrical codes and regulations.

Introduction: Thank you for your purchase of a Knoll Eco-System multi-channel power amplifier and congratulations on your choice. This amplifier is specifically designed to save energy when idling, which can be most of the time. When compared to similar power amplifiers the KES400 and KES600 uses less than 5% of the energy required for normal amps to idle.

FEATURES:

∙Eco-System™ Circuitry saves energy (and money) and increases power.

∙12 channels x 50 watts RMS at 8 Ohms (over 100W peak). KES400 8 channels.

∙Individual and automatic channel resetting protection for low impedance, overheating, overloading, overvoltage and undervoltage.

∙Individual gain controls for all channels.

∙Electronic Link feature connects stereo inputs channel 2 through 6 to channel 1. KES400 connects stereo inputs channel 2 through 4 to channel 1.

∙Side-mounted thermostatically controlled fan for internal cooling.

∙Two rack spaces (3-1/2”) with optional rack mount version.