Knoll Systems C16 installation instructions CI6 amplifier channel is individually

4

Introduction: Thank you for your purchase of a Knoll CI6 12 channel controller amplifier and congratulations on your choice. The CI6 features six deluxe digital volume controlled stereo amplifiers with individual seven source selection. This is Knoll's fourth generation of multi-channel, high-quality power amplifiers. The CI6 is designed to meet the amplifier needs of custom installed multi-zone systems where high quality sound is a specific requirement.

Each of the six zones or rooms can select any of the seven inputs, with individual volume control, bass, treble and balance. Extras such as an external voltage trigger that can turn source equipment on and off, individual zone infrared outputs, a fully balanced paging override, RS232 control, fully buffered line level outputs and many more features give the CI6 exceptional value when installed in homes and large complex systems. Except for the power button all controls are rear mounted. A data port is provided for ganging multiple CI6's. Infrared signals can be relayed from the keypads to the source equipment.

The CI6 is normally controlled by MR164 or MR166 long distance LCD keypads with or without Knoll remote controls or RS232 commands from whole house controllers. The paging override is normally used for whole house announcements or doorbell chimes.

with seven input source selection. Selection, volume level, bass, treble and balance is made on MR164 keypads, Knoll remote control (or a programmed remote control) or via an external controller. Rooms can have different source selections, volumes, etc.

require a MR164 keypad, RB12 remote control or external controller via RS232. The keypads are typically mounted in the room with the speakers and they control amplifier power on/off, volume up/down and mute as well as source selection.

CI6 consists of a total of 12 power amplifiers in one 3-1/2" high enclosure (two rack spaces). Each power amplifier channel can deliver 50 watts RMS with peaks of 100 watts. Because of its unique design the CI6 delivers exceptional value.

CI6 amplifier channel is individually

and fully protected against low impedance, overheating, overloading, over voltage and under voltage. The protection circuitry automatically restores the amplifier channel as soon as its parameter returns to the safe operating area.

adjustment. Each channel features adjustments so installers can preset the room for speaker differences and listener preferences.

CI6 can turn on and off source components with its

12vdc trigger output.

64 keypad features all zone control of all off, all zones to any one source (then set volume at 1/3) and all zones volume up or down.