6

Speaker connections

The CI6 has six stereo 50 watts per channel amplified outputs. Channels 5 and 6 also have line level outputs to connect to larger powered amplifiers.

To ensure that the high quality signals produced by your amplifier are carried to your speakers without loss of clarity or resolution, Knoll advises that you use high-quality speaker wire. Many brands of wire are available — the choice may be influenced by the distance between your speakers and the amplifier, the type of speakers you use, personal preferences, along with other factors.

Regardless of the brand or type of speaker wire chosen, we suggest that you use a wire constructed of fine, multi-strand copper with a gauge of 16 or less (the lower the number, the thicker the cable). Wire with a gauge of 16 may be used for short runs of less than 12 feet. We do not recommend that you use any wires with an AWG equivalent of 18 or higher due to the power loss and degradation in performance.

To connect the amplifiers to your speakers, a removable plug with screws is provided for each stereo channel output. Strip approximately 1/4 inch of insulation from the end of each wire and carefully twist the strands of each conductor together. Be sure not to cut the individual strands or twist them off. All strands must be used for optimal performance. Insert the wire into the plug and screw the screws very tight. Inspect that no wire “hairs” that can short circuit are not in the plug.

Correct polarity connections are important to maintain proper speaker phasing. When speaker phasing is correct, all speakers move in and out at the same time preserving the imaging of the program material. Out-of-phase connections mean that some turn off, check your speakers to verify that they are operating properly. If all other potential sources of trouble check out properly, contact Knoll for further assistance.

Run the cables to speaker locations. Do not coil any excess cable, as this may become an inductor that creates frequency response variations in your system. Lastly, connect the wires to the speakers, again being aware of proper polarity. Remember to connect the negative, or black wire, to the matching terminal on the speaker. The positive, or red wire should be connected to the matching terminal on the speaker.

Note: While most speaker manufacturers follow industry convention of using red terminals for positive connections and black terminals for negative, some manufacturers may vary from this configuration. To ensure proper phase connections, and optimal performance, consult the identification plate on our speaker terminals, or the speaker’s manual to verify polarity. Contact the speaker’s manufacturer if you do not know the polarity of your speakers.

Page 6
Image 6
Knoll Systems C16 installation instructions Speaker connections

C16 specifications

Knoll Systems C16 is an advanced multi-room audio distribution system that has gained recognition for its superior sound quality and versatility. Designed for both residential and commercial applications, the C16 caters to the needs of audiophiles and casual listeners alike, providing an impressive audio experience throughout any space.

One of the standout features of the C16 is its capability to support up to 16 zones, allowing users to enjoy different audio sources in various rooms simultaneously. This modular design means that users can easily expand their systems as needs evolve, making it an investment that evolves with changing requirements.

The C16 employs state-of-the-art digital signal processing (DSP) technology to deliver clear, precise sound. By optimizing sound quality for individual rooms, the system ensures that the auditory experience is tailored and enhanced. The customizable equalizer settings further allow users to fine-tune audio output based on their preferences and the unique acoustics of each space.

Another key characteristic of the Knoll Systems C16 is its compatibility with a variety of audio sources. The system supports streaming platforms, local libraries, and traditional media, making it a comprehensive solution for music lovers. Integrated Wi-Fi and Bluetooth connectivity also facilitate seamless playback from smart devices, promoting convenience and flexibility.

User control is simplified through the intuitive interface of the C16. The system can be managed via a mobile app, providing easy navigation and control over individual zones. Additionally, voice command integration with popular smart home systems enhances the user experience, allowing for hands-free operation.

Built for durability and efficiency, the C16 is designed with energy-saving features that minimize power consumption without compromising performance. Whether installed in a luxury home or a bustling commercial environment, the system’s robust build quality ensures reliable operation.

In conclusion, the Knoll Systems C16 stands out as a leading multi-room audio solution, combining advanced technologies, flexible feature sets, and exceptional sound quality. With its ability to adapt to varied environments and its user-friendly controls, the C16 is an excellent choice for anyone looking to enhance their audio experience. Whether for enjoying music alone or entertaining guests, this system truly sets the standard for multi-room audio distribution.